Table of Contents
Advertisement
42
PENTOUCH
Method 2:
Open the control panel for the graphics card on
your computer.
Set [Display Mode] to the [Single Display] mode,
then select [LG TV] as the display to use.
* Set the computer's display resolution to
1920x1080 (Except for 50PT49**), 1024x768 (Only
50PT49**).
NOTE
The method of changing display resolution
y
settings may vary according to the
computer's configuration.
Pentouch does not support dual monitor
y
mode or duplicate (mirror) monitor mode.
Check that the PC screen is set to only be
displayed on the TV.
The switch screen key of the laptop may be
y
subject to change by the manufacturer.
Viewing the Screen Settings
Image shown may differ from your TV.
y
If you press the OK button on the remote control,
the screen shown below appears to indicate
that the screen settings have been updated
successfully.
TOUCH
Pentouch
1
The text "Pentouch" should be displayed to
y
1
indicate that the Pentouch mode is activated. If
not, restart the Pentouch mode.(See p.41)
"1920x1080(except for 50PT49**) and
y
2
1024x768 (only 50PT49**) " should be displayed
to indicate that the resolution has been set
successfully. If not, set the monitor resolution
again.(See p.41)
2
CAUTION
The double-click function may not work
y
as intended in Windows XP and Vista
because these operating systems do not
use touch drivers.
The Pentouch operation may become
y
slow depending on the computer's
performance.
The screen size may change if you
y
disconnect the computer's output port
and connect it again. If this happens, set
the computer resolution again.
If nothing is shown on the TV and the
y
laptop screen when you press the switch
screen key (Fn + manufacturer-specified
key), try pressing the key again.
The TV screen size may become smaller
y
when you press the switch screen key
(Fn + manufacturer-specified key). If this
happens, adjust the resolution again.
Changing the desktop icon properties
y
in Windows 7 may affect the Pentouch
program.
It is recommended not to run other
y
applications while using the Pentouch
program.
If the point you touch on the TV screen
y
using the touch pen and the point
indicated as touched on the computer
screen do not match when the computer
and TV are connected by a PC signal
(RGB) cable, use the TV remote control
to select [Home] → [PICTURE] →
[SCREEN] (RGB), then select [Auto
Configure] to adjust the screen.
If the PC and TV are only connected by
y
a PC (RGB) signal cable, there will be no
sound from the TV. Please connect the
PC and the TV with a PC audio cable as
well.
The Play Video function in Photo Editor
y
may not work as intended, depending on
the codecs installed on your computer.
If you want to open programs with a
y
single click in Window XP or Vista, On
your PC, go to Start →Control Panel →
Folder Options and select "Single-click to
open an item (point to select)."
If your PC is running Windows XP, the
y
virtual keyboard will only support English.
When changing to the Pentouch mode, or
y
when changing the resolution in Pentouch
mode for RGB input signals, images may
not be displayed properly for a while due
to auto adjustment.
Advertisement
Table of Contents
