Remote Controller - Hitachi RAS-DX10CSK Manual

Indoor unit/outdoor unit
Table of Contents

Advertisement

NAMES AND FUNCTIONS OF EACH PART

REMOTE CONTROLLER

• This controls the operation of the indoor unit.
The range of control is about 7 meters. If indoor lighting is controlled electronically, the range of
control may be shorter, in some cases, the control signal may not be received.
This unit can be fixed on a wall using the fixture provided. Before fixing it, make sure the indoor unit
can be controlled from the remote controller.
• Handle the remote controller with care.
Dropping it or getting it wet may compromise its signal transmission capability.
Transmission Sign
The transmission sign blinks
when a signal has been send.
FUNCTION selector
Use this button to select the
operating mode. Every time
you press it, the mode will
change from
(COOL) to
(DEHUMIDIFY) and
to
(FAN) cyclically.
ECO Button
Use this button to set the ECO
mode.
(
Page 1 2)
SLEEP button
Use this button to set the sleep
timer.
(
Page 1 3)
OFF TIMER Button
Select the turn OFF time.
(
Page 1 1)
ON TIMER Button
Select the turn ON time.
(
Page 1 1)
Precautions for Use
• Do not put the remote controller in the following places.
• In direct sunlight
• In the vicinity of a heater.
• Handle the remote controller carefully. Do not drop it on the floor, and
protect it from water.
• Once the outdoor unit stops, it will not restart for about 3 minutes (unless
you turn the power switch off and on or unplug the power cord and plug
it in again).
This is to protect the device and does not indicate a failure.
• If you press the FUNCTION selector button during operation, the device
may stop for about 3 minutes for protection.
Signal Transmission
- 7 -
POWERFUL Button
Press this button to start
powerful operation. (
Page 1 1)
FAN SPEED Button
Select the fan speed for each
mode.
START/STOP button
Press this button to start operation.
Press it again to stop operation.
AUTO SWING (Horizontal)
Button
Control the angle of the
horizontal air defl ector.
(
Page 1 4 )
TEMPERATURE Button
Room temperature setting.
Value will change quicker when
keep pressing.
AUTO SWING (Vertical)
Button
Control the angle of the
vertical air defl ector.
(Page 1 4 )

Advertisement

Table of Contents
loading

Table of Contents