Download Print this page
TP-Link WA850RE Installation Manual

TP-Link WA850RE Installation Manual

Universal wi-fi range extender

Advertisement

Quick Links

Quick Installation Guide
2
Connect and Extend
Method 1: Via the WPS Button
1. Press the WPS button on your router.
WPS
2. Within 2 minutes, press the
extender for 1 second.
The extended network shares the same network
name and password as your router.
Note: If the WPS method fails, or if you want to customize the
extended network name, use Method 2 or 3.
3
Relocate and Enjoy
1. Plug in the extender about halfway between your router and the Wi-Fi dead
zone. The location you choose must be within the range of your host network.
2. Wait until the
LEDs are lit. Make sure 3 or more LEDs lit. If not, relocate the
extender closer to the router to achieve better signal quality.
Enjoy the internet!
Method 2: Via a Web Browser
1. Connect your computer or smartphone to the
extender's network.
The WPS button might
TP-Link_Extender
look like one of these:
2. Launch a web browser, and enter
http://tplinkrepeater.net or http://192.168.0.254
in the address bar. Create a password to log in.
button on the
Note: If the login window does not appear, refer to FAQ > Q1.
The RE LED should
change from blinking to
solid on, indicating
successful connection.
3. Follow the instructions to complete the setup.
Note:
1. The RE LED should turn solid on. If not, refer to FAQ > Q3.
2. You can customize the network name during the setup.
1
Power On
Plug the extender into a power outlet next to your router.
http://tplinkrepeater.net
Create Password
Confirm Password
Start
Host Network
Wait until the Wireless
LED turns solid on.
Method 3: Via the Tether App
1. Download the Tether app.
or
Scan for Tether
2. Connect your smartphone to the extender's
network.
TP-Link_Extender
3. Launch the Tether app, and select your extender.
Create a password to log in.
4. Follow the instructions to complete the setup.
Note:
1. The RE LED should turn solid on. If not, refer to FAQ > Q3.
2. You can customize the network name during the setup.
Network Name:
Customized/same as host network
Password:
Same as host network
Extended Network
Best
5
4
≥ 3 LEDs lit on
3
Good
2
1
Slow/Unstable
Tether

Advertisement

loading
Need help?

Need help?

Do you have a question about the WA850RE and is the answer not in the manual?

Questions and answers

raj
May 31, 2025

plz conect

Subscribe to Our Youtube Channel

Summary of Contents for TP-Link WA850RE

  • Page 1 Power On Plug the extender into a power outlet next to your router. Quick Installation Guide Wait until the Wireless LED turns solid on. Connect and Extend Method 1: Via the WPS Button Method 2: Via a Web Browser Method 3: Via the Tether App 1.
  • Page 2 With the extender powered on, use a pin to press the RESET button for 1 second. The extender will reboot. TP-Link hereby declares that the device is in compliance with the essential requirements and other relevant provisions of directives 2014/53/EU, 2009/125/EC and 2011/65/EU. The original EU declaration of conformity may be found at http://www.tp-link.com/en/ce.