Panasonic VIERA TX-P50UT50E Operating Instructions Manual page 18

3D Eyewear (optional)
Note
Use the 3D Eyewear within approximately 3.2 m from the TV. You cannot view the 3D images with the 3D Eyewear
too far from the TV, because of the difficulty of receiving radio waves from the TV.
The range may be shortened depending on the obstacles between the TV and the 3D Eyewear, or the surrounding
environment.
There are differences in the viewing range of the 3D Eyewear among individuals.
The 3D Eyewear may not operate correctly at the outside of the viewing range.
To view the 3D images
You can enjoy the 3D images in a variety of ways.
(Frame Sequential, Side by Side and Top and Bottom are the supported 3D format.)
Playing back 3D-compatible Blu-ray disc (Frame Sequential format)
Connect the 3D-compatible player via a fully wired HDMI compliant cable.
If input mode is not switched automatically, select the input mode connected to the player.
If you use the non 3D-compatible player, the images will be displayed on 2D mode.
3D-supported broadcast
Please consult the suppliers of contents or programmes for availability of this service.
3D photos and 3D videos taken by 3D-compatible Panasonic products
Available in Media Player and Network services
2D images converted to 3D
Set to [2D 3D] mode in [3D Mode Selection].
Preparations
Perform the First Registration when the 3D Eyewear is used for the first time. For details, read the manual of the 3D
Eyewear.
Turn the 3D Eyewear on and put it on
1
Connection status and battery status are displayed on the bottom right of the screen.
View the 3D images
2
Safety precautions will be displayed when you first watch the 3D image. Select [Yes] or [No] to continue to view
3D images.
If you select [Yes], this message will be displayed again in the same condition after Mains power On / Off
switch is next turned on. Select [No] if you do not want to display this message again.
Turn off the 3D Eyewear after using it.
18
Use the Panasonic 3D Eyewear that has this logo and supports
Bluetooth
"Full HD 3D Glasses™" logo indicates products that are compatible with the active shutter 3D
glasses technology standards licensed by the Full HD 3D Glasses Initiative. The RF mark on
the logo means the wireless system (Bluetooth
Eyewear and the TV that have the same mark together.
® wireless technology.
® wireless technology), and you can use the 3D