Table of Contents
Advertisement
Information for Users on Collection and Disposal of Old Equipment and used Batteries
These symbols on the products, packaging, and/or accompanying documents mean that
used electrical and electronic products and batteries should not be mixed with general
household waste. For proper treatment, recovery and recycling of old products and
used batteries, please take them to applicable collection points, in accordance with your
national legislation and the Directives 2002/96/EC and 2006/66/EC.
By disposing of these products and batteries correctly, you will help to save valuable
resources and prevent any potential negative effects on human health and the
environment which could otherwise arise from inappropriate waste handling.
For more information about collection and recycling of old products and batteries, please
contact your local municipality, your waste disposal service or the point of sale where you
purchased the items.
Penalties may be applicable for incorrect disposal of this waste, in accordance with
national legislation.
For business users in the European Union
If you wish to discard electrical and electronic equipment, please contact your dealer or
supplier for further information.
[Information on Disposal in other Countries outside the European Union]
These symbols are only valid in the European Union. If you wish to discard these items,
please contact your local authorities or dealer and ask for the correct method of disposal.
Note for the battery symbol (bottom two symbol examples) :
This symbol might be used in combination with a chemical symbol. In this case it
complies with the requirement set by the Directive for the chemical involved.
Customer Care Centre
• For customers within the UK: 0844 844 3852
• For customers within Ireland: 01 289 8333
• Visit our website for product information: www.panasonic.co.uk
• E-mail: customer.care@panasonic.co.uk
Direct Sales at Panasonic UK
• For customers: 0844 844 3856
• Order accessory and consumable items for your product with ease and confidence by phoning our Customer
Care Centre Monday − Thursday 9:00am − 5:30pm, Friday 9:30am − 5:30pm (Excluding public holidays).
• Or go on line through our Internet Accessory ordering application at www.pas-europe.com.
• Most major credit and debit cards accepted.
• All enquiries transactions and distribution facilities are provided directly by Panasonic UK.
• It couldn't be simpler!
• Also available through our Internet is direct shopping for a wide range of finished products, take
a browse on our website for further details.
Declaration of Conformity (DoC)
Authorized Representative :
Panasonic Testing Centre
Panasonic Marketing Europe GmbH
Winsbergring 15, 22525 Hamburg, Germany
Customer's Record
The model number and serial number of this product may be found on its rear panel. You should note this
serial number in the space provided below and retain this book, plus your purchase receipt, as a permanent
record of your purchase to aid in identification in the event of theft or loss, and for Warranty Service purposes.
Model Number
Willoughby Road, Bracknell, Berkshire, RG12 8FP
Web Site : http://panasonic.net
© Panasonic Corporation 2011
Sales and Support Information
Serial Number
M0511-0
Printed in Czech Republic
Advertisement
Table of Contents
Related Manuals for Panasonic Viera TX-P42UT30B
Summary of Contents for Panasonic Viera TX-P42UT30B
- Page 1 • Or go on line through our Internet Accessory ordering application at www.pas-europe.com. • Most major credit and debit cards accepted. • All enquiries transactions and distribution facilities are provided directly by Panasonic UK. • It couldn’t be simpler! • Also available through our Internet is direct shopping for a wide range of finished products, take a browse on our website for further details.
- Page 2 TX-P42UT30B TX-P50UT30B Operating Instructions Plasma Television Thank you for purchasing this Panasonic product. Please read these instructions carefully before operating this product and retain them for future reference. The images shown in this manual are for illustrative purposes only. TQB0E2163...
- Page 3 VIERA Connect - Enjoy great web entertainment (p. 17, 76) VIERA Connect allows you to access some specific websites supported by Panasonic, and enjoy internet contents such as photos, videos, games, etc. from VIERA Connect home screen. Link up and control the connected equipment with “Q-Link” and “VIERA Link” (p. 77) Q-Link and VIERA Link provide easy recording and playback, creation of a home theatre without complicated settings, etc.
-
Page 4: Table Of Contents
(p. 94) Identifying Controls ·····································9 Basic Connection······································ 11 Auto Setup ················································13 Panasonic does not guarantee operation and performance of peripheral devices made by other manufacturers; and we disclaim any liability or damage arising from operation and/or performance Enjoy your TV! from usage of such other maker’s peripheral devices. -
Page 5: Safety Precautions
Safety Precautions Warning ■ Mains plug and lead To help avoid risk of electrical shock, fire, damage or injury, please follow the warnings below: • This TV is designed to operate on AC 220-240 V, 50 / 60 Hz. • Insert the mains plug fully into the socket outlet. - Page 6 Do not insert foreign objects into the TV through the air vents. • Do not use an unapproved pedestal / mounting equipment. Be sure to ask your local Panasonic dealer to perform the setup or installation of approved wall-hanging brackets.
-
Page 7: Accessories / Options
Keep these parts out of reach of young children. Optional accessories Please contact your nearest Panasonic dealer to purchase the recommended optional accessories. For additional details, please refer to the manual of the optional accessories. - Page 8 Do not use any pedestal other than the one provided with this TV. • Do not use the pedestal if it becomes warped or physically damaged. If this occurs, contact your nearest Panasonic dealer immediately. • During setup, make sure that all screws are securely tightened.
- Page 9 Assembly screw (4) Assembly screw Base • (silver) (black) TBL5ZX0203 • • XYN5+F20FN XSB4+8FNK (TX-P42UT30B) • TBL5ZX0204 M4 × 8 (TX-P50UT30B) M5 × 20 Assembly screw (4) Pole • (black) TBL5ZA3055 • THEL087N (TX-P42UT30B) • (TX-P42UT30B) Cover TBL5ZA3065 • •...
-
Page 10: Identifying Controls
Identifying Controls Remote Control 8 OK • Confirms selections and choices INPUT • Press after selecting channel positions to quickly change channel MENU ASPECT DIRECT TV REC 9 [Option Menu] (p. 20) EXIT • Easy optional setting for viewing, sound, etc. - Page 11 8 Headphones jack (p. 87) 9 AV2 terminals (p. 87) 10 Mains power On / Off switch • Use to switch the mains power. If you turned the TV Off during Standby mode by the remote control last time, the TV will be in Standby mode when you turn the TV On with Mains power On / Off switch.
-
Page 12: Basic Connection
Basic Connection External equipment and cables shown are not supplied with this TV. Please ensure that the unit is disconnected from the mains socket before attaching or disconnecting any leads. When disconnecting the mains lead, be absolutely sure to disconnect the mains plug at the socket outlet first. There are some restrictions on placement for viewing 3D images. - Page 13 Example 3 Connecting DVD Recorder / VCR and Satellite receiver TV, DVD Recorder / VCR and Satellite RF cable Terrestrial Rear of the TV aerial Fully wired HDMI compliant cable AC 220-240 V Fully wired Aerial input terminal 50 / 60 Hz SCART cable Fully wired...
-
Page 14: Auto Setup
Auto Setup Search and store TV channels automatically. • These steps are not necessary if the setup has been completed by your local dealer. • Please complete connections (p. 11, 12) and settings (if necessary) of the connected equipment before starting Auto Setup. -
Page 15: Setup The Network Connection
Setup the network connection Setup the network connection to enable the network service functions such as VIERA Connect, etc. (p. 17, 70). • To setup the wireless connection, the Wireless LAN Adaptor (optional accessory) is required. Please note that this TV does not support wireless public access points. •... -
Page 16: Input Owner Id
4. Select [Yes] Access Point Settings select Encryption key is set to:- XXXXXXXX • Select 'Yes' to confirm. To re-enter the encryption key, select [No]. Select 'No' to change. • If the connection has failed, check the encryption key, settings and positions of your access point. And then, follow the on screen instructions. - Page 17 ■ How to input Owner ID Enter the PIN number (4 digits) • Enter the PIN number twice at first setting. Owner ID Please enter new PIN pqrs wxyz * * * Select the item (NAME / HOUSE NO / POSTCODE) select Owner ID-Data Entry * * * *...
-
Page 18: Turn Power On
Using “VIERA Connect” VIERA Connect is a gateway to the internet services unique to Panasonic and has expanded VIERA CAST features greatly. VIERA Connect allows you to access some specific websites supported by Panasonic, and enjoy internet contents such as photos, videos, games, etc. from VIERA Connect home screen. -
Page 19: Select A Channel
Watching TV Turn power on • Press for about 1 second • Mains power On / Off switch should be On. (p. 10) ■ VIERA Connect introduction banner appears You can access to VIERA Connect and enjoy the various contents. (p. -
Page 20: Other Useful Functions
Other useful functions Display Information banner Display Information banner • Also appears when changing a channel Example : DVB 20:35 HDTV Coronation Street All DVB Channels 20:00 - 20:55 Info Select favourites Mute Bad signal STTL TEXT Multi Audio 1 Channel position and name 5 Programme Start / Finish time (DVB) 2 Channel type ([Radio], [Data], [HDTV], Channel number, etc. -
Page 21: Off Timer
Hold Freeze / unfreeze picture HOLD Display the selectable settings for the current status Check or change the current status instantly • To change OPTION select / change select access store [Monaural Audio] [Teletext Character Set] [Audio Description] (DVB mode) (DVB mode) Allows you to select stereo / Sets the teletext language font... -
Page 22: Display Subtitles
Aspect Change the aspect ratio (image size) Enjoy viewing the image at its optimum size and aspect. ASPECT Programmes usually contain an “Aspect Control Signal” (Widescreen signal, etc.), and the TV will choose the aspect ratio automatically according to the “Aspect Control Signal” (p. 88). ■... -
Page 23: Using Tv Guide
Using TV Guide TV Guide−Electronic Programme Guide (EPG) provides an on screen listing of the programmes currently broadcast and the forthcoming broadcasts over the next seven days (depending on the broadcasters). • This TV supports the GUIDE Plus+ system. • The Rovi branding partner will supply the rating information in the programme information and the recommended group in the Search list. -
Page 24: Timer Programming (Dvb Mode)
■ To search programme types and view a channel list of the searched programmes (DVB mode) (yellow) (Search list) (Type list) select type Search Prog.Type All Types view All Types Search Titles... Movie Movie News News and Factual ■ To search programme titles and view a list of the searched programmes (DVB mode) (yellow) •... -
Page 25: Guide Link Programming (Timer Programming From The Tv Guide Signal)
Note • This function is not available in Analogue mode. • Timer Programming reminder messages will remain displayed until one of the following occurs : • You press the OK button to view the programme or the EXIT button to cancel the reminder. •... -
Page 26: Viewing Teletext
Viewing Teletext You can enjoy news, weather forecasts and subtitles, etc. (depending on the broadcaster) • The availability of teletext services for a programme is indicated by [TEXT] in the information banner. Information banner (p. 19) 20:35 Coronation Street All DVB Channels 20:00 - 20:55 BBC ONE WALES Select favourites... - Page 27 Analogue teletext Analogue teletext services are the text information provided by the broadcasters. The features may vary depending on the broadcasters. What is FASTEXT mode? In FASTEXT mode, four differently coloured subjects are situated at the bottom of the screen. To access more information about one of these subjects, press the appropriately coloured button.
- Page 28 FULL / TOP / BOTTOM MENU (green) (TOP) (BOTTOM) Normal (FULL) (Expand the BOTTOM half) (Expand the TOP half) View in multi window Watch TV and Teletext in two windows at once TEXT • Operations can be made only in Teletext screen. •...
-
Page 29: Watching External Inputs
Watching External Inputs Connect the external equipment (VCRs, DVD equipment, etc.) and you can watch through the AV input. • To connect the equipment (p. 11, 12, 85 - 87) The remote control is capable of operating some functions of selected external equipment. “Operating the equipment with the TV remote control”... - Page 30 Start recording How to change the code for the type of the equipment Each type of the Panasonic equipment has its own remote control code. Please change the code according to the equipment you want to operate. Set the position to “DVD/VCR”...
-
Page 31: Viewing 3D Images
• times of image height. Stop using the 3D Eyewear immediately if a TX-P42UT30B : 1.6 m or more malfunction or fault occurs. • TX-P50UT30B : 1.9 m or more Stop using the 3D Eyewear immediately if you... - Page 32 ■ 3D photos and 3D videos taken by 3D-compatible Panasonic products • Available in Media Player (p. 61 - 63, 66) ■ 2D images converted to 3D Set to [2D 3D] mode in [3D Mode Selection] (p. 32) Turn the 3D Eyewear on...
- Page 33 Changing 2D - 3D mode You can easily change the viewing mode between 2D and 3D using the 3D button. Select the mode • Items of [3D Mode Selection] select 3D Mode Selection vary depending on the condition. [3D] / [2D] / [2D 3D] : Displays the appropriate image that you desire without selecting 3D format •...
- Page 34 3D Settings If the 3D images are not displayed correctly or seem unusual, please adjust and setup the 3D settings. Display the menu MENU Select [Picture] select Main Menu access Picture Sound Timer Setup Select [3D Settings] select P-NR 3D Settings Access Screen Display access...
-
Page 35: How To Use Viera Tools
How to Use VIERA TOOLS You can access some special features easily by using the VIERA TOOLS function. • For [VIERA Link Control] function to operate correctly, ensure the connections and settings are completed. “Summary of Q-Link and VIERA Link features” (p. 77, 78), “Preparations” (p. 80) After connection, turn the equipment on and then switch the TV on. -
Page 36: How To Use Menu Functions
How to Use Menu Functions Various menus allow you to make settings for the picture, sound, and other functions. Display the menu • Displays the functions that can be set (varies according to the MENU input signal) Select the menu Example : [Picture Menu] select Main Menu... -
Page 37: Menu List
Menu list Menu Item Adjustments / Configurations (alternatives) Basic picture mode [Dynamic] / [Normal] / [Cinema] / [True Cinema] / [Game] / [Photo] In each Viewing Mode, [Contrast], [Brightness], [Colour], [Sharpness], [Tint], [Colour Balance], [Vivid Colour], [C.A.T.S.], [P-NR] and [3D-COMB] can be adjusted and stored to suit your particular viewing requirement. - Page 38 Menu Item Adjustments / Configurations (alternatives) Automatically compensates the picture frame rate and removes juddering movements to make the images smooth [Off] / [Mid] / [Max] • Intelligent Frame Depending on the contents, images may be noisy. To prevent the Creation noise, change the setting.
- Page 39 Menu Item Adjustments / Configurations (alternatives) Adjusts the frequency level to suit your favourite sound quality • This function is available when [Mode] is set to [User]. • Select the frequency and change the frequency level by using the cursor button. •...
- Page 40 Menu Item Adjustments / Configurations (alternatives) Sets programme reminders and records forthcoming programmes Timer Programming (p. 51) Sets the time until the TV automatically goes to Standby mode Off Timer [Off] / [15] / [30] / [45] / [60] / [75] / [90] (minutes) (p. 20) Sets the duration of time that the TV will remain On when no operation is received from the user [Off] / [2] / [4] (hours) •...
- Page 41 Menu Item Adjustments / Configurations (alternatives) Favourites Edit Creates a list of favourite DVB channels (p. 48) Skips the unwanted DVB channels or edits DVB channels (p. 49) Channel List Automatically searches for the DVB channels received in the area Auto Setup (p.
- Page 42 Menu Item Adjustments / Configurations (alternatives) VIERA Connect Sets the VIERA Connect introduction banner display [Off] / [On] Banner (p. 17, 18) Set to [On] to display a continuous record of time spent using Game Playing Time mode every 30 minutes [Off] / [On] •...
- Page 43 Overview (Picture, Sound, Timer, Setup) How to operate (p. 35) Available in NTSC Main Menu Viewing Mode Dynamic Not available when Contrast [Viewing Mode] is set to Picture Brightness Colour [True Cinema] Sharpness Sound Tint Colour Balance Warm Vivid Colour Timer Available when [Viewing Mode] is Reversal Film Effect...
- Page 44 TV Guide Settings Menu Main Menu TV Guide View Normal GUIDE Plus+ Postcode Access GUIDE Plus+ Information Access Picture (p. 39) Sound Enter Postcode Postcode Timer A B C D E F G H J K L M N O P Q R S T U V W X Y Z Setup .!:#...
- Page 45 Overview (Setup) How to operate (p. 35) Main Menu Picture DVB Tuning Menu Sound TV Guide Settings Access Favourites Edit Access Eco Navigation Access Channel List Access Link Settings Access Auto Setup Access Timer Child Lock Access Channel Sorting by Region Access DVB Tuning Menu Access...
- Page 46 DVB Favourites Editor All DVB Channels All DVB Channels Favourites1 1 BBC One Wales 70 CBBC Channel 7 BBC THREE 72 Cartoon Nwk 14 E4 CBBC Channel DVB Manual Tuning 105 BBCi 72 Cartoon Nwk Frequency [CH21] 474,00 MHz 719 BBC Radio Wales BBCi Signal Quality BBC Radio Wales...
-
Page 47: Retuning From Setup Menu
Retuning from Setup Menu Automatically retune the channels received in the area. • This function is available if channel tuning is already performed. • Only the selected mode is retuned. All the previous tuning settings are erased. • If Child Lock PIN number (p. 53) has been set, the PIN number is required. •... -
Page 48: Tuning And Editing Channels (Dvb)
Tuning and Editing Channels (DVB) You can retune channels or make your favourite channel lists, skip unwanted channels, etc. Select DVB (p. 18) Display the menu MENU Select [Setup] select Main Menu access Picture Sound Timer Setup Select [DVB Tuning Menu] select DVB Tuning Menu Access... -
Page 49: Check Dvb Signal [Signal Condition
List favourite DVB channels [Favourites Edit] Create your favourite channel lists from various broadcasters (up to 4 : [Favourites]1 to 4). The DVB Favourites lists are available for switching in the Information banner (p. 19) and from [Category] in the TV Guide screen (p. 22). Select a channel to list ( : Encrypted channel) DVB Favourites Editor... - Page 50 Skip unwanted DVB channels, Edit DVB Channels [Channel List] You can hide unwanted DVB channels. The hidden channels cannot be displayed except in this function. Use this function to skip unwanted channels. Select a channel and [reveal] / [hide] • To reveal all channels select All DVB Channels...
-
Page 51: Fine Tuning
Skip unwanted Analogue channels, Edit Analogue channels [Channel List] You can hide unwanted Analogue channels. The hidden channels cannot be displayed except in this function. Use this function to skip unwanted channels. Select a channel and [reveal] / [hide] • To reveal all channels select Analogue Channel List... -
Page 52: Timer Programming
Timer Programming Timer Programming from Menu The Timer Programming menu allows you to choose programmes that you wish to remind watching or record to the external recorder. At the correct time, the TV will tune to the correct channel automatically to record even if the TV is in Standby mode. -
Page 53: Set Timer Programming Event Details [Timer Programming
Set timer programming event details [Timer Programming] Start making the settings Select the function select ([Ext Rec.] or [Reminder]) [Reminder] [Ext Rec.] to remind you to watch the programme to record the programme to the external recorder When you are watching TV, a reminder message When the start time comes, the channel will be switched appears 2 minutes before the start time. -
Page 54: Child Lock
Child Lock You can lock specific channels / AV input terminals and control who watches them. When the locked channel / input is selected, a message appears; by entering the PIN number, you can watch it. Display the menu MENU Select [Setup] select Main Menu... -
Page 55: Input Labels
Input Labels For easier identification and selection of the input mode, you can label each input mode or skip terminal that is not connected to any equipment. • To select the input mode (p. 28) Display the menu MENU Select [Setup] select Main Menu access... -
Page 56: Shipping Condition
Shipping Condition Resets the TV to its original condition with no channels tuned in. All settings other than [Owner ID] are reset (channels, picture, sound settings, etc.). • To retune TV channels only, e.g. after moving house “Retuning from Setup Menu” (p. 46) Display the menu MENU Select [Setup]... -
Page 57: Owner
Owner ID Entry of the PIN number and personal information (your name, address and postcode). In the unfortunate event of theft, the Owner ID will help the Police to determine the owner. Display the menu MENU Select [Setup] select Main Menu access Picture Sound... -
Page 58: Using Common Interface
Using Common Interface The Common Interface Module menu provides access to software contained on Common Interface (CI) Modules. TV works only for Pay TV modules complying with CI standard. • This function is not available for BskyB’s Sky channels. • Video and audio signals may not be output depending on broadcasts or services. -
Page 59: Updating The Tv Software
Updating the TV Software From time to time, a new version of software may become available for download to enhance the performance or operations of the TV. In DVB mode, a notification banner will appear when one of the BBC channels is turned to if a new available software is found. -
Page 60: Using Media Player
Using Media Player Media Player allows you to enjoy photo, video or music recorded on an SD Card and a USB Flash Memory. VIERA IMAGE VIEWER is the function of the easy viewing for photos or videos recorded on an SD Card on the TV screen by simply inserting into the SD Card slot. - Page 61 Starting Media Player Insert the SD Card or USB Flash Memory to the TV (p. 59) Start Media Player Media Player Signal output from all AV terminals will be disabled during Media Player view. • Also possible by pressing following Press OK to proceed.
- Page 62 Photo mode Photo mode will read all “.jpg” extension files and supports “.mpo” extension files in the SD Card or USB Flash Memory. The thumbnail of all the photos in the SD Card or USB Flash Memory will be displayed. Example : Thumbnail - [All photos] All photos Media Player...
-
Page 63: Multi Shot 3D
[Single view] - Photos are displayed one at a time. Select the file from the thumbnail of photos to be viewed select access Example : • • To display / hide the To operate Single view Single view operation guide To the previous photo Slideshow To the next photo... -
Page 64: Photo Settings
Create the 3D photo • If your selected photos are not suitable for the 3D photo, the error message will be displayed and will return to the photo selection screen (step 3). • To save the 3D photo in the SD Card select [Yes] The 3D image will be saved onto your media. - Page 65 Menu Item Adjustments / Configurations (alternatives) Selects the frame type of the slideshow [Off] / [Multi] / [Collage] / [Drift (+ calendar)] / [Drift] / [Gallery (+ calendar)] / [Gallery] / [Cinema] [Multi] : 9 photos are displayed orderly at once. [Collage] : Each photo is displayed at a random position and random scale.
- Page 66 Menu Item Adjustments / Configurations (alternatives) Selects the back ground music during Photo mode [Off] / [Type1] / [Type2] / [Type3] / [User] / [Auto] • [Type1], [Type2] and [Type3] are the fixed music each installed in this [User] : Music data in the device registered by yourself will be played back.
- Page 67 Video mode • Supported file format (p. 89) The thumbnail of video titles in the SD Card or USB Flash Memory will be displayed. Example : Thumbnail - [Title view] The preview will start when the title is Title view Media Player Video highlighted if it supports a preview.
- Page 68 ■ How to operate in the playback Example : Playback • • To display / hide the operation guide To change aspect 19/02/2010 11:21 00:15:39 00:02:05 and information banner ASPECT • To the previous title / • To operate the playback scene Rewind EXIT...
-
Page 69: Audio Output Settings
Audio output Settings You can enjoy the multi-channel sound via an amplifier connected to DIGITAL AUDIO OUT or HDMI2 (ARC function) terminal. • To confirm or change the current sound status “Confirm or change the current status” (p. 67) Display the menu Select [Sound] Select [SPDIF Selection] and set MENU... -
Page 70: Music Setup
■ Playback from File view Selected file will be played back. Select the folder Select the file Start playback Example : Thumbnail - File view (red) select Folder view > My Music_1 Media Player Music access My Song_1 My Song_2 My Song_3 My Song_4 My Song_5... -
Page 71: Using Network Services
Using Network Services VIERA Connect VIERA Connect is a gateway to the internet services unique to Panasonic and has expanded VIERA CAST features greatly. VIERA Connect allows you to access some specific websites supported by Panasonic, and enjoy internet contents such as photos, videos, games, etc. from VIERA Connect home screen. -
Page 72: Network Link Settings
Enables to control the TV from the network equipment (Smartphone, etc.) [Off] / [On] • Network Remote Depending on the area, this function may not be available. For details, Control consult your local Panasonic dealer. • For more information of this function, visit the following website. http://panasonic.jp/support/global/cs/tv/... -
Page 73: Wired Connection Settings
Wired connection settings This setting is for the network connection by using the LAN cable. Select [Network Type] and set to [Wired] select Network Setup Connection Test Network Type Wired access / store Access Point Settings IP/DNS Settings Network Link Settings Software Update MAC Address ab-cd-ef-gh-ij-kl... -
Page 74: Wireless Connection Settings
Select [Connection Test] and access to test select Network Setup Connection Test Access Network Type Wired access Access Point Settings • Performs automatic testing of the network connection for the TV. IP/DNS Settings Network Link Settings (It takes a while to test.) Software Update MAC Address ab-cd-ef-gh-ij-kl... - Page 75 ■ [WPS(Push button)] press the WPS button on the access point until the light flashes WPS(Push button) 1) Please press the ‘WPS’ button on the access point until its light flashes. 2) When the light is flashing select ‘Connect’ on connect the Wireless LAN Adaptor and the access point •...
- Page 76 Enter the encryption key of the access point (Set characters one by one) Store select Access Point Settings Encryption key BACK/ RETURN A B C D E F G H J K L M N O P Q R S T U V W X Y Z •...
- Page 77 • The services through VIERA Connect are operated by their respective service providers, and service may be discontinued either temporarily or permanently without notice. Therefore, Panasonic will make no warranty for the content or the continuity of the services. •...
-
Page 78: Link Functions (Q-Link / Viera Link)
Connect the equipment supporting VIERA Link to the TV’s HDMI1, HDMI2 or HDMI3 terminal via an HDMI cable. • For information about using HDMI cables for connecting Panasonic HD Video Camera or LUMIX Camera, read the manual of the equipment. - Page 79 VIERA Link (HDMI and Audio out connections) Connected equipment Player theatre with Blu-ray Disc theatre with Amplifier with Features VIERA Link function VIERA Link function VIERA Link function Analogue channel download – – – ∗ ∗ Easy playback – Power on link –...
-
Page 80: Power Off Link
Q-Link Preparations • Connect the DVD Recorder / VCR with the following logos : “Q-Link”, “NEXTVIEWLINK”, “DATA LOGIC (a trademark of Metz Corporation)”, “Easy Link (a trademark of Philips Corporation)”, “Megalogic (a trademark of Grundig Corporation)” or “SMARTLINK (a trademark of Sony Corporation)” •... -
Page 81: Easy Playback
• Please refer to individual manuals for other manufacturers’ equipment supporting VIERA Link function. • For information about applicable Panasonic equipment, consult your local Panasonic dealer or refer to www.panasonic.co.uk Preparations • Connect the equipment that supports VIERA Link. - Page 82 Reduce unnecessary power consumption in standby [Standby Power Save] Set Standby Power Save [On] in the Setup Menu to use this function [Standby Power Save] (p. 39) The power consumption in Standby mode of the connected equipment is controlled in synchronization with the TV On / Off state.
- Page 83 Pause Live TV programme [Pause Live TV] You can pause the live TV programme and resume the programme later. The Live TV programme will be recorded on HDD of the connected DIGA Recorder. • This function is available with a DIGA Recorder which has HDD. •...
-
Page 84: Operate The Menu Of The Equipment
Select the equipment you want to access The type of the connected equipment is displayed. Select the type of the equipment and access. select VIERA Link Menu Pause Live TV Start Direct TV Rec Start access / store VIERA Link Control Recorder Speaker Selection Home Cinema... - Page 85 Speaker control [Speaker Selection] You can control the home theatre speaker with this TV remote control (point the remote control at the TV’s signal receiver). • If you cannot operate, check the settings and the equipment “Summary of Q-Link and VIERA Link features” (p. 77, 78), “Preparations” (p. 80) Display [VIERA Link Menu] Select [Speaker Selection] select...
-
Page 86: External Equipment
External Equipment These diagrams show our recommendations for connection of your TV to various pieces of equipment. For other connections, consult the instructions for each piece of equipment, the table (p. 87), and the specifications (p. 102, 103). To record / playback Terrestrial aerial RF cable DVD Recorder /... - Page 87 Network (wired) Less Less Internet than than 10 cm 10 cm LAN cable Modem Hub or Router Ferrite core (supplied) Installing the Ferrite core Pull back the tabs Wind the cable Press the cable (in two places) twice through and close Side panel of the TV USB devices...
- Page 88 Headphones Rear of the TV Side panel of the TV (M3 stereo mini plug) • To adjust volume [Headphone Volume] (p. 38) Types of connectable equipment to each terminal Terminal Recording / Playback (equipment) To record / playback videocassettes / DVDs (VCR / DVD Recorder) To watch 3D contents (Blu-ray Disc Player)
-
Page 89: Technical Information
Technical Information Auto Aspect The optimum size and aspect can be chosen automatically, and you can enjoy finer images. (p. 21) Aspect Control Signal [WIDE] will appear in the top left of the screen if a Widescreen signal (WSS) or a Control signal through SCART / HDMI terminal is found. - Page 90 WMA Pro and WMA Lossless are .wmv VC-1 not supported. • This TV supports this container H.264 BP / MP / recorded by Panasonic products. .mp4 For details, read the manual of the Dolby Digital products. Linear PCM (RAW / TWOS / •...
- Page 91 ■ Music Codec File extension Restrictions .mp3 – • .m4a Copy-protected files cannot be played back. • Copy-protected files cannot be played back. .wma • WMA Pro and WMA Lossless are not supported. Note • Some files may not be played back even if they fulfill these conditions. •...
- Page 92 • Back up the recorded data at regular intervals in case of deteriorated or damaged data or erratic operation of the TV. (Panasonic is not liable for any deterioration or damage of recorded data.) SCART and HDMI terminal information AV1 SCART terminal (RGB, VIDEO, Q-Link)
-
Page 93: Dvi Connection
Characters table for numeric buttons You can enter characters by using numeric buttons for free input items. Press the numeric button repeatedly until you User input reach the desired character. Name pqrs wxyz A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 0 1 2 3 4 5 6... -
Page 94: Usb Keyboard
You cannot use two or more same kind of USB devices simultaneously except USB Flash Memory. • Additional information for USB devices may be on the following website. http://panasonic.jp/support/global/cs/tv/ USB Keyboard • The USB Keyboard which requires the driver is not supported. -
Page 95: Faqs
FAQs Before requesting service or assistance, please follow these simple guides to resolve the problem. If the problem still persists, please contact your local Panasonic dealer or Panasonic Customer Care Centre for assistance. For details (p. 104) Block noise, frozen or disappearing image occurs in digital mode / White spots or shadow image (ghosting) occurs in Analogue mode / Some channels cannot be tuned •... - Page 96 Problem Actions • Set [P-NR] in the Picture Menu (to remove noise). (p. 36) • Chaotic image, noisy Check nearby electrical products (fluorescent lamp, DECT phones, mobile phones, microwave, etc.). • Is [Contrast], [Brightness] or [Colour] in the Picture Menu set to the No image can be minimum? (p.
-
Page 97: On Screen Messages
Check if foreign objects are inside the USB port. • Follow the message’s instructions. An error message • If the problem persists, contact your local Panasonic dealer or the appears authorized Service Centre. On screen messages Message Meaning / Action All tuning data will be •... - Page 98 • Please also refer to p. 94. local signal availability. • If channels are still not found, consult your local Panasonic dealer. Press OK to start Auto Setup. • No module inserted Check the CI module is inserted completely (p. 57).
- Page 99 Message Meaning / Action Reset to Factory Shipping • [Auto Setup] will automatically start when Mains power On / Off Condition Completed. switch is next turned On. (p. 13) Please switch off TV. • Sending Preset Data Q-Link or VIERA Link channel download is in progress. Software successfully updated.
-
Page 100: Maintenance
Maintenance First, remove the mains plug from the socket outlet. Display panel, Cabinet, Pedestal Regular care : For stubborn dirt : Gently wipe the surface of the display panel, Dampen a soft cloth with clean water or diluted neutral cabinet, or pedestal by using a soft cloth to detergent (1 part detergent to 100 parts water). -
Page 101: Index
Index Accessories ······················································6 PAL ·································································88 Analogue Tuning Menu ······················46, 49, 50 Pixel Orbiter ···················································37 Aspect ······················································21, 88 Pedestal ···························································7 Audio Description ·····································20, 38 Photo mode ····················································61 Auto Gain Control ··········································38 PIN number ········································15, 53, 56 Auto Setup ···············································13, 46 Playing Time Display ······································41 Auto Standby ·················································39 P-NR ······························································36 AV1 out·····················································39, 78... -
Page 102: Licence
HDMI Licensing LLC in the United States and other countries. • HDAVI Control™ is a trademark of Panasonic Corporation. • “AVCHD” and the “AVCHD” logo are trademarks of Panasonic Corporation and Sony Corporation. • x.v.Colour™ is a trademark. •... -
Page 103: Specifications
Specifications TX-P42UT30B TX-P50UT30B Power Source AC 220-240 V, 50 / 60 Hz Rated Power 270 W 315 W Consumption Standby Power 0.40 W Consumption 16.00 W (With monitor out recording) 1,023 mm × 671 mm × 320 mm 1,212 mm × 782 mm × 335 mm... - Page 104 Temperature : 0 °C - 35 °C Operating Conditions Humidity : 20 % - 80 % RH (non-condensing) AV1 (SCART) 21 Pin terminal (Audio/Video in, Audio/Video out, RGB in, Q-Link) VIDEO RCA PIN Type × 1 1.0 V[p-p] (75 Ω AV2 input AUDIO L - R RCA PIN Type ×...