Philips RQ1168/50 Manual page 37

3 Lift the retaining frame out of the shaving head
holder.
4 Remove the cutter from the shaving guard.
Note: Do not clean more than one cutter and shaving
guard at a time, since they are all matching sets. If you
accidentally put a cutter in the wrong shaving guard,
it may take several weeks before optimal shaving
performance is restored.
5 Clean the cutter with the cleaning brush
supplied.
6 Clean the inside of the shaving guard.
7 After cleaning, place the cutter back into the
shaving guard with the cutter legs pointing
downwards.
36
ENGLISH