Table of Contents
Advertisement
8.9 Frost Precautions
If the appliance is installed in an area
where the temperature can be less than
0 °C, remove the remaining water from
the inlet hose and the drain pump.
Emergency Drain
1. Disconnect the main plug from the
main socket. Turn off the water tap.
2. Remove the water inlet hose.
3. Remove the drain hose from the rear
support and unhook it from sink or
spigot.
4. Put the end of the drain and inlet hose
in a container. Let the water flow out
of the hoses.
5. W hen no more water flows, install the
inlet hose and the drain hose again.
NOTE
Make sure that the temperature is
more than 0 °C before you use the
appliance again.
ENGLISH
29
Advertisement
Chapters
Table of Contents
