At The End Of The Program; When The Washing Program Is Completed, But There Is Water In The Drum; Auto Off Mode - Electrolux EWF1142BDWA User Manual

5.9 At The End Of The
Program
− The appliance stops automatically.
− The acoustic signal will operate.
− The display will show "
− T he indicator of the touchpad Start/
Pause goes off.
− T he door lock indicator "
− R emove the laundry from the
appliance. Make sure that the drum is
empty.
− K eep the door partly open, to prevent
the mildew and odours.
− Turn off the water tap.
NOTE
At the end of the program, the time
remaining can suddenly decrease
from 7 minutes or less to 0 due to
the overestimated total program time
during the load sensing phase. In some
cases (with perfectly balanced load) the
program time can be shorter than the
time estimated after the load sensing
phase is completed. This is a normal
behavior of the machine and not a cause
for concern as it does not compromise its
performance.
5.10 When The Washing
Program Is Completed, But
There Is Water In The Drum
(Option "Rinse Hold
− T he drum turns regularly to prevent
the creases in the laundry.
− T he indicator "Start/Pause" flashes to
remind you to drain the water.
− T he door lock indicator "
The door stays locked.
You must drain the water to
open the door.
".
" goes off.
" is used)
" is on.
To drain the water:
1. Press the "Start/Pause
The appliance drains the water and
spins with the maximum spin speed
for selected program.
Alternatively, before pressing the
"Start/Pause" touchpad, you can
press the "Spin" touchpad to change
the spin speed. You can select "No
Spin ( )", if you want the machine
to only drain the water.
2. When the program is completed and
the door lock indicator "
you can open the door.
3. Press the "On/Off" button to
deactivate the appliance.
NOTE
After approximately 18 hours, if you
do not press Start/Pause touchpad,
the appliance will drain and spin
automatically (except for "Wool"
program).

5.11 AUTO Off Mode

The AUTO Off mode automatically
deactivates the appliance to decrease
the energy consumption when:
● Y ou do not press any buttons for
5 minutes before you press "Start/
Pause".
− P ress the "On/Off" button to
activate the appliance again.
● A fter 5 minutes from the end of the
washing program.
− P ress the "On/Off" button to
reactivate the appliance. Display
will show the end of the last wash.
− P ress any touchpad again to show
the last wash program.
ENGLISH 21
" touchpad.
" goes off,