COMFORT-AIRE Century PTTC09B-1 Owner's Manual page 18

AIR CONDITIONER FEATURES
TO OPERATE ON FAN ONLY:
Auto
High
Heat
Cool
Med
Low Fan Only
Fan
Mode Temp/Timer
Speed
Reset
Timer
Filter
Note: Use this function only when cooling is not desired, such as for room air circulation.
You can choose any fan speed you prefer, EXCEPT AUTO FAN. During this function, the
display will show the actual current temperature, not the set temperature as in the cooling
mode.
TIMER-DELA
START/ST A
Auto
High Heat
Med Cool
Low Fan Only
Fan
Mode Temp/Timer
Speed
Reset
Timer
Filter
Note 1: For Delay Stop, the unit must be in the ON position.
Note 2: For Delay Start, the unit must be in the OFF position.
To adjust timer setting, tap or hold the UP arrow (^) or DOWN arrow (v) to change the delay
time by 0.5 hour increments up to 10 hours, then by 1 hour increments up to 24 hours. The
control will count down the timer remaining until start (8, 7.5, 7, etc.). After set Timer, the
unit will enter into Timer mode for 5 seconds, then Timer light on, Set light off. In Timer
mode: Unit keeps previously set temperature and fan speed; Temperature display set
temperature, no display if power turn off; Press Timer once, LED display remaining time of
set time, LED returns to set temperature in 5 seconds. When in Fan Only mode, LED only
displays room temperature, not display set temperature. Turning the unit "ON" or "OFF" at
any time will cancel the Delay Start/Stop function. The delay Start/Stop feature will work
until the unit either starts or stops. Once this has happened then the above steps have to
be repeated again.
(continued)
Set
PRESS
MODE BUTTON
Temp/Timer
CHOOSE
On
Off
FAN ONLY
FIRST DO THIS:
PRESS TIMER BUTTON
Set
Temp/Timer
PRESS TEMP/TIMER
On
Off
Owner's Manual - PTTC/PTTE/PTTH-09/12B-1
BUTTON
18
-15-
:
Auto
High
Heat
Cool
Med
Low Fan Only
Fan
Mode Temp/Timer Temp/Timer
Speed
On
Off
Reset
Timer
Filter
THE TIME CHOSEN:
Auto
High Heat
Med Cool
Low Fan Only
Fan
Mode Temp/Timer Temp/Timer
Speed
On
Off
Reset
Timer
Filter
Set
Set