Supermicro A2SDi-H-TF User Manual page 74

A2SDi-H-TP4F/TF User's Manual
M.2 PCI-E 3.0 X2 OPROM
Use this feature to select the firmware type for the add-on card for this slot. The options are
Disabled, Legacy, and EFI.
Onboard LAN OPROM Type
Use this feature to select the Onboard LAN Option ROM type. The options are Disabled,
Legacy, and EFI.
Onboard Video OPROM
Use this feature to select the Onboard Video Option ROM type. The options are Disabled,
Legacy, and EFI.
VGA Priority
Use this feature to select the type of video display. The options are Onboard and Offboard.
Network Stack
Select Enabled to enable PXE (Preboot Execution Environment) or UEFI (Unified Extensible
Firmware Interface) for network stack support. The options are Enabled and Disabled.
*If "Network Stack" is set to Enabled, the following four features will become available
for configuration:
IPv4 PXE Support
Use this feature to enable Ipv4 PXE Boot Support. If this feature is disabled, it will not create
the Ipv4 PXE Boot option. The options are Disabled and Enabled.
IPv6 PXE Support
Use this feature to enable Ipv6 PXE Boot Support. If this feature is disabled, it will not create
the Ipv6 PXE Boot option. The options are Disabled and Enabled.
PXE boot wait time
Use this feature to select the wait time to press the ESC key to abort the PXE boot. The
default is 0.
Media detect count
Use this feature to select the wait time in seconds to detect LAN media. The default is 1.
Super IO Configuration

Super IO Chip AST2400
 Serial Port 1 Configuration
74