About This Manual
This manual is written for system integrators, IT technicians and knowledgeable end users.
It provides information for the installation and use of the A2SDi-H-TP4F/TF motherboard.
About This Motherboard
The Supermicro A2SDi-H-TP4F/TF motherboard comes with an integrated Intel® Atom
SoC C3000 series (FCBGA1310) that has up to 16 Cores, a TDP of 32W and is optimized
for low-power consumption. The integrated memory controller supports up to 256GB of
DDR4 ECC memory with a max data rate of 2400MHz, USB 3.0, and 10GbE Ethernet. The
A2SDi-H-TP4F/TF motherboard is an excellent choice for embedded storage solutions.
Please note that this motherboard is intended to be installed and serviced by professional
technicians only.
For processor/memory updates, please refer to our website at http://www.supermicro.com/
products/.
Conventions Used in the Manual
Special attention should be given to the following symbols for proper installation and to prevent
damage done to the components or injury to yourself:
Warning! Indicates important information given to prevent equipment/property damage
or personal injury.
Warning! Indicates high voltage may be encountered when performing a procedure.
Important: Important information given to ensure proper system installation or to
relay safety precautions.
Note: Additional Information given to differentiate various models or provides infor-
mation for correct system setup.
Preface
3
Preface