Supermicro A2SDi-H-TF User Manual page 34

A2SDi-H-TP4F/TF User's Manual
Reset Button
The Reset Button connection is located on pins 3 and 4 of JF1. Attach it to a hardware reset
switch on the computer case to reset the system. Refer to the table below for pin definitions.
Power Button
The Power Button connection is located on pins1 and 2 of JF1. Momentarily contacting both
pins will power on/off the system. This button can also be configured to function as a suspend
button (with a setting in the BIOS - see Chapter 4). To turn off the power in the suspend
mode, press the button for at least 4 seconds. Refer to the table below for pin definitions.
2
PWR
Power Button
1
Reset
Reset Button
Reset Button
Pin Definitions (JF1)
Pins Definition
3 Reset
4 Ground
Power Button
Pin Definitions (JF1)
Pins Definition
1 Signal
2 Ground
1 2
Ground
Ground
Power Fail LED
3.3V
OH/Fan Fail
UID LED
NIC2 Active LED
3.3V Stby
3.3V Stby
NIC1 Active LED
3.3V Stby
HDD LED
3.3V
PWR LED
15 16
34
1. Reset Button
2. PWR Button