Maintenance Phase; After Use - Philips Lumea Comfort User Manual

How to achieve optimal results
First two months
- It is normal that hairs are still visible after the first few
treatments (see chapter 'Introduction', section 'Working
principle' for more information).
- To remove all hairs successfully and prevent the hair
follicle from becoming active again, the treatments have
to be repeated once every two weeks for the first two
months. Your skin should be smooth by then. Please
read section 'Maintenance phase' to find out how you
can keep these results.

Maintenance phase

- To ensure that your skin stays smooth, we advise you
to repeat the treatment every 4 to 8 weeks. The time
between treatments may vary based on your individual
hair regrowth and also across different body areas. If
too many hairs grow back between treatments, simply
shorten the treatment interval again, but do not treat
any area more often than once every two weeks.
When you use the appliance more frequently than
recommended, you do not increase the effectiveness but
you do increase the risk of skin reactions.

After use

- Press and hold the on/off/intensity button to switch off
the appliance. Pull the adapter out of the wall socket.
- Clean the skin contact surface (see chapter 'Cleaning and
maintenance').
- Store the appliance in a safe and dry place in its original box.
- Do not apply any perfumed cosmetics to treated
skin immediately after treatment.
- Do not use deodorant immediately after treatment
of the underarms. Wait until any skin redness has
disappeared.
- See chapter 'Contraindications, precautions and
warnings', section 'Warning about sun exposure and
artificial tanning' for information on sun exposure and
artificial tanning.
ENGLISH
21