Tune To A Radio Station; Store Radio Stations In Memory - Philips CED1910BT/98 User Manual

Select a radio range
1
Tap [Radio Range].
2
Tap [Distance] or [Local] to select a
tuner sensitivity.
• [Distance]: Stations with strong
and weak signals can be tuned
to.
• [Local]: Only stations with strong
signals can be tuned to.
Enable the RDS feature
Note
•
RDS feature is enabled by default.
•
Only after the RDS feature is enabled, the
option of [PTY list] is displayed.
Tap [RDS On] to enable the RDS
feature.
» The option of [PTY list] is displayed.
•
To disable the RDS feature, tap
[RDS Off].
20 EN

Tune to a radio station

1
Tap FM or AM to select a band.
• FM bands: FM1, FM2, FM3
• AM bands: AM1, AM2
2
Tap or repeatedly until the
frequency of target radio station is
displayed.
•
To tune to a radio station
automatically, tap and hold
until the frequency digits start
change.
Tip
•
You can also press BAND on the remote
control repeatedly to select a band.
Store radio stations in
memory
You can store up to 6 stations in each
band.
Store radio stations manually
1
Select a band.
2
Tune to the target radio station.
3
Tap and hold one of the channels (1
to 6) over two seconds.
» The radio station is saved under
the selected channel.
or