Connecting A Foot Switch; Connecting A Unit Pedal; Connecting A Microphone - Medeli SP4200/WH Owner's Manual

Connections

Connecting a Foot Switch

To achieve a natural effect, step on the sustain switch when playing.
Plug an supplied foot switch into this jack and use it to switch
sustain on or off.
Note：
1. This instrument supports not only the foot switch we supply, but
also those with other brands.
2. Please make sure the power is off when connecting the pedal
with other brands, otherwise the sequence of switch on/off will be
reversed when turning the piano on.

Connecting a Unit Pedal

To simulate a real piano, the unit pedal can be connected to the
pedal terminal at the rear bottom of the piano.
It contains three functional pedals: Sustain, Sostenuto, Soft.
Sustain Pedal
Use this pedal to sustain the sound.It also supports the half-pedal
operation. Performing with the sustain pedal will achieve a smoothly
effect.
Sostenuto Pedal
This pedal sustains only the sounds of the keys that were already
played when you pressed the pedal.
Soft Pedal
This pedal is used to make the sound softer.
Note:
The unit pedal needs to be purchased separately.

Connecting a Microphone

By connecting a microphone, you can enjoy singing along with your
keyboard performance or with Song playback (KARAOKE).
1. Before turning the power on, set the master volume to minimal
value.
2. Plug the microphone into the [MIC] jack at the rear of the
instrument.
3. Turn the power on. Adjust the master volume value while singing
through the microphone.
08
USB MIDI OUT MIDI IN
PHONES
1 2
USB MIDI OUT MIDI IN SUSTAIN AUX OUT
SUSTAIN AUX OUT AUX IN MIC DC IN
AUX IN MIC DC IN