Lorex LNZ32P4BW Instruction Manual page 7

3 Connecting the Camera
Step 1 of 2 — OPTION A: Connecting the camera to your local network using an op-
tional PoE switch:
1. Connect an Ethernet cable of up to 300ft (91m) rated CAT5e or higher (not included)
from the LAN port on an external PoE switch (sold separately on
www.lorextechnology.com) to your router. Connect the power cable to the PoE switch
and plug into a power outlet or surge protector.
NOTE
Terminology may vary depending on the model of PoE switch you have.
2. Connect the camera to the PoE switch using the included Ethernet cable (or a CAT5e
Ethernet cable of up to 300ft (91m)). The PoE switch will provide power and video
transmission the same way as your NVR.
Step 1 of 2 — OPTION B: Connecting the camera to your local network using a
power adapter:
#LX400075; r.41474/44665; en-US
4