Lorex LNZ32P4BW Instruction Manual page 25

7 Controlling the PTZ camera with LNK Series NVRs
1. Select the channel for the PTZ camera you want to set presets for.
2. Use the directional arrows to move the PTZ camera to the desired view for the preset.
3. Click the arrow next to PRESET to reveal preset controls.
4. In the field next to Time, enter an amount of time in seconds. This will determine how
long the PTZ camera looks at the preset area before switching to the next preset in a
cruise.
5. Click Save to confirm the current preset point.
6. Click + to move to the next preset number in the No. field. Repeat for as many preset
points as you wish to add.
NOTE
• Each preset viewing area you add to the system must have a unique ID number (No.). Using the
same ID number as an existing preset will result in the old preset being overwritten.
• To cycle through preset viewing points automatically, click
have enabled cruise on the selected PTZ camera (see 7.1 Controlling the PTZ camera, page 20
for details).
• Click to delete a preset.
#LX400075; r.41474/44665; en-US
to start PTZ Cruise. Ensure you
22