Philips FlexCare Platinum HX9134/35 Manual page 34

Rechargeable sonic toothbrush
Table of Contents

Advertisement

ENGLISH
Recycling
Do not throw away the appliance with the normal
household waste at the end of its life, but hand it in
at an official collection point for recycling. By doing
this, you help to preserve the environment.
Removing the rechargeable battery
This process is not reversible.
To remove the rechargeable battery, you need a
flat-head (standard) screwdriver. Observe basic
safety precautions when you follow the procedure
described below. Be sure to protect your eyes, hands,
fingers, and the surface on which you work.
1
Remove the toothbrush from the charger,
switch it on and let it operate until it stops.
Continue to switch on the Sonicare until the
battery is completely empty.
2
Insert a flathead (standard) screwdriver into
the slot located at the bottom of the handle.
Turn the screwdriver anticlockwise to release
the bottom cap.
3
Place the handle on a solid surface with the
buttons facing up and lightly tap the housing
2.5cm from the bottom edge with a hammer.
4
Hold the handle upside down and push
down on the shaft to release the internal
components of the handle.
5
Insert the screwdriver under the circuit board,
next to the battery connections, and twist to
break the connections. Remove the circuit
33

Advertisement

Table of Contents
loading

Table of Contents