Philips FlexCare Platinum HX9134/35 Manual page 28

ENGLISH
Brushing modes
Clean: For an exceptional everyday clean
1
(default mode).
2 White: 2 minutes to remove surface stains and
30 seconds to brighten and polish your front
teeth.
Deep Clean: Provides an invigorating 3
3
minutes of alternating cleaning and massaging to
deliver an exceptionally clean experience.
Your Sonicare comes with the Clean mode activated.
Note: When the toothbrush is switched on, you cannot
toggle between modes.
1 Before you switch on the Sonicare, press the
mode button to toggle between modes.
, The selected brushing mode lights up.
, Once a brushing mode has been selected, it
remains active until you select another brushing
mode.
Note: When the Sonicare is used in clinical studies,
it must be used in the default 2-minute Clean mode
at high intensity or in the Deep Clean mode at high
intensity.
Intensity levels per mode
- Low: 1 LED indicator light.
- Medium: 2 LED indicator lights.
- High: 3 LED indicator lights.
Note: to adjust the intensity level to the next higher
or lower level, you can press the + button to increase
intensity or the - button to decrease intensity at any
time during the brushing cycle.
27