3D Menu - Canon 1318C002 User Manual

3D Menu

HDMI
DISPLAY
Test Pattern
Label
3D Format*
DLP Link
3D Swap
*
■ The freeze function cannot be used during 3D projection.
■ Please select AUTO once again or select a known 3D format, when a 3D signal is not detected
normally even if a 3D format is set by AUTO.
PICTURE LASER
3D Format
DLP Link
3D Swap
Press ENTER to open the 3D Format window. Press ▲ or ▼ to select
the 3D format. The options are Off, Auto, Side by Side (Half), Top and
Bottom or Frame Sequential.
Side by Side (Half): Transmission of separate
images for left and right sides, placed next to
each other. The image's horizontal definition is
halved.
Top and Bottom: Transmission of separate
images for left and right sides, placed one
above the other. The image's vertical definition
is halved.
Frame Sequential: Transmission of separate
images for left and right sides in sequence
producing a single video stream.
Press ◄ or ► to activate or deactivate the DLP Link sync.
Press ◄ or ► to select a status for 3D images viewed through the 3D
glasses. The options are Normal or Reverse.
49
ALIGNMENT CONTROL
3D
Enter
Off
Normal
Description
SERVICE
Side by Side (Half)
L
R
Top and Bottom
L
R
L
R
Frame Sequential