Picture Menu - Canon 1318C002 User Manual

PICTURE Menu

Label
Picture Mode (*1)
Brightness (*2)
Contrast
Saturation (*3)
Hue (*3)
Gamma
Color
Color Temperature (*1)
White Balance
Sharpness
Noise Reduction
VGA Setup (*1) (*4)
(*1) This function is grayed-out and unusable when in 3D projection.
(*2) The Brightness setting does not affect maximum brightness. To change the laser brightness
mode, use the Power Mode setting.
(*3) Adjustment is possible only when video signal is input.
(*4) Adjustment is possible only when signals from the computer is input through Computer-1 and
Computer-2/BNC.
HDMI
DISPLAY PICTURE LASER
Picture Mode
Brightness
Contrast
Saturation
Hue
Gamma
Color
Color Temperature
White Balance
Sharpness
Noise Reduction
VGA Setup
Press ◄ or ► to select a picture mode. The options are Presentation,
Standard and Video.
Presentation: Suitable for viewing text-based images in a bright room.
Standard: Suitable for projecting a computer screen or watching media
played with video software in a bright room. This image mode
emphasizes white tones.
Video: Suitable for watching video taken with a video camera in a moderately dark
room.
Press ◄ or ► to adjust the brightness of the projected image.
Press ◄ or ► to adjust the contrast of the projected image.
Press ◄ or ► to adjust the saturation level of the color.
Press ◄ or ► to adjust the level of hue for reproduction of the true color.
Press ◄ or ► to adjust the gamma correction of the projected image. The
options are 1.0, 1.8, 2.0, 2.2, 2.35 and 2.5.
Press ENTER to enter the Color menu. See
Press ◄ or ► to adjust the color temperature. The options are Native,
5400K, 6500K, 7500K, 8200K and 9300K.
Press ENTER to enter the White Balance menu. Press ▲, ▼, ◄ or ► to
adjust settings.
Press ◄ or ► to adjust the sharpness.
Press ◄ or ► to adjust the noise of the projected image.
Press ENTER to enter the VGA Setup menu. See
page 52.
ALIGNMENT CONTROL
Presentation
100
100
100
100
2.2
Native
10
0
Description
"Color
50
SERVICE
Menu" on page 51.
"VGA Setup Menu" on