Change Speaker Settings - Philips HTS3373/51 User Manual

Table of Contents

Advertisement

Note
If a blank/distorted screen is displayed, wait for
15 seconds for the auto recover.
If no picture displayed, turn off the progressive
scan mode as follows: 1) Press to open
the disc compartment. 2) Press . ) Press
AUDIO SYNC.
8
SETUP to exit the menu.
Press
9
You can now turn on the progressive scan
mode on the TV.
Note
If distorted picture is displayed, turn off the
progressive scan feature on this product and
TV.

Change speaker settings

Ideally, the distance between listening position
and all the speakers should be the same. If not,
change the speaker settings based on their
distance from the listening position to obtain
the best possible surround sound.
Audio Setup
Audio Setup
Speakers Volume
Speakers Volume
Speakers Delay
Speakers Delay
HDMI Audio
HDMI Audio
CD Upsampling
CD Upsampling
Audio Sync
Audio Sync
1
Press DISC.
2
SETUP.
Press
3
Press to select [Audio Setup] in the
menu, then press .
If the speaker setup option is not
accessible, press twice before you
SETUP.
press
To set the speakers level
1
Select [Speakers Volume] in the menu,
then press .
Speakers Volume Setup
Speakers Volume Setup
Front Left
Front Left
Front Right
Front Right
Center
Center
Subwoofer
Subwoofer
Rear Left
Rear Left
Rear Right
Rear Right
2
Press
to change the volume level,
then press OK.
»
The test tone is emitted from the
speaker.
Repeat the above setting for other
speakers until all the speakers output
level sounds equally balance.
To exit the menu, press
To set the output delay time (center and rear
speakers only)
1
Select [Speakers Delay] in the menu,
then press .
Speakers Distance Setup
Speakers Distance Setup
Center
Center
Rear Left
Rear Left
Rear Right
Rear Right
2
Press
to set the delay time, then press
OK.
Repeat the above setting for other
speakers until the sound output from
different speakers reach the listening
position at the same time.
To exit the menu, press
0dB
0dB
0dB
0dB
0dB
0dB
0dB
0dB
0dB
0dB
0dB
0dB
SETUP.
0MS
0MS
0MS
0MS
0MS
0MS
SETUP.
EN
17

Advertisement

Table of Contents
loading

This manual is also suitable for:

Hts3373

Table of Contents