Options - Atag VA63313LT User Manual

10
3. Press on/off to confirm the setting.
AirDry
AirDry improves the drying results with
less energy consumption.
During the drying phase, the
door opens automatically and
remains ajar.
CAUTION! Do not try to close
the appliance door within 2
minutes after automatic
opening. This can cause
damage to the appliance.
If, afterwards, the door is
closed for another 3 minutes,
the running programme ends.

OPTIONS

Desired options must be
activated every time before you
start a programme.
It is not possible to activate or
deactivate options while a
programme is running.
Not all options are compatible
with each other. If you select
non compatible options, the
appliance automatically
deactivates one or more of
them. Only the indicators of the
still active options are on.
AirDry is automatically activated with all
programmes excluding Rinse Hold (if
applicable).
To improve the drying performance refer
to the Extra Dry option or activate AirDry.
CAUTION! If children have
access to the appliance, it is
advised to deactivate AirDry as
opening the door may pose a
danger.
How to deactivate AirDry
Make sure the appliance is in user mode.
1. Press .
• The indicators
and are off.
• The indicator
• The indicator
setting.
– If the indicator
AirDry is activated.
– If the indicator
AirDry is deactivated.
2. Press to change the setting.
3. Press on/off to confirm and save the
setting.
Extra Dry
Activate this option to boost the drying
performance. With Extra Dry on, the
duration of some programmes, water
consumption and the last rinse
temperature can be affected.
Extra Dry is a permanent option for all
programmes other than Eco 50° and need
not to be selected at every cycle.
In the other programmes the setting of
Extra Dry is permanent and it is
automatically used in next cycles. This
configuration can be changed at any time.
, ,
still flashes.
shows the current
is on =
is off =