Table of Contents
Advertisement
Maintenance
Make sure fixture is cool and disconnected from power mains before any service.
Weekly operating hours and environmental conditions will establish how often the fixtures need
cleaning. Fixtures should be cleaned and inspected at least once a month to maintain optimum
performance.
Accumulation of dust and fog residue increases heat build up, can lead to
malfunctions, overheating and reduction in maximum light output, reduced fixture life and over
all performance. Before conducting any maintenance, disconnect fixture from power mains.
1) Disconnect fixture from power mains.
2) Use a vacuum with a soft brush to remove dust collected on external vents and internal
components.
If using an air compressor, use low pressures and extreme care to prevent
damaging any internal parts or effects.
4) Clean all optical elements when the fixture is cold. Use a soft lint free cotton cloth or tissue
and cleaner safe for plastics.
5) Inspect clamps and safety cables to ensure fixture is secure and safe.
Accessory Items
Order Code
TA-BDR/UL7
CL-CBHALF
CL-MEGA/B
CL-MINI/B
CA-XLR3/5
CA-XLR3/10
CA-XLR3/25
CA-XLR3/50
CA-XLR5/5
CA-XLR5/10
CA-XLR5/15
CA-XLR5/25
CO-XLRTERM3
CO-XLR3MTO5F
CO-XLR5MTO3F
(sold separately)
Description
4-Leaf Barndoor - Black
Half Cheese-borough Coupler 300kg Max Load
Mega 2" Pipe Heavy Duty Clamp – ½" bolt - Black
MNB Clamp-Mini 3/4"-2"Pipe - Black
Pre-made 5' 3-pin XLR Cable
Pre-made 10' 3-pin XLR Cable
Pre-made 25' 3-pin XLR Cable
Pre-made 50' 3-pin XLR Cable
Pre-made 5' 5-pin XLR Cable
Pre-made 10' 5-pin XLR Cable
Pre-made 15' 5-pin XLR Cable
Pre-made 25' 5-pin XLR Cable
XLR 3 Pin Data Terminator
XLR 3 Pin Male to 5 Pin Female Adapter
XLR 5 Pin Male to 3 Pin Female Adapter
12
Advertisement
Table of Contents
