Printing Procedure - Mitsubishi Electric P93E Operation Manual

7
PRINTING

Printing Procedure

1 Turn on the power.
2 Print a picture displayed on the screen.
• Display a picture to
be printed on the
monitor screen, and
press the PRINT
button.
Copy Printing
2 You can set the number of copies by pressing the
COPY button on the front panel.
You can copy the same picture as many times as
you desire by pressing the COPY button.
Copy printing is also available by using the function
mode.
Refer to page 21 "PRINT button function setting"
and "Setting of the number of prints" for setting.
Cancel of Copy Printing
2 When pressing the FEED button during copy
printing, the copy printing is cancelled upon comple-
tion of the current copy.
Paper Feeding
2 To feed the paper, hold down the FEED button on
the front panel.
• Press the
"POWER"
switch to turn
on the power.
When printing
finishes, a
buzzer tone will
be heard.
12
3 Cut the printed paper.
cutter
• Do not pull the paper in the horizontal
direction. The paper inside the unit may
be displaced and printing may not be
carried out correctly.
• Cut the printed
paper with the
cutter by
tearing off the
paper in the
upper right
direction.
COPY
FEED