Demonstrate Features; Turn On - Philips DCM1075 User Manual

4
Press / or VOL -/+ to select 12 hour
or 24 hour format.
5
Press PROG/CLOCK SET.
» The hour digits begin to blink.
6
Press / or VOL -/+ to set the hour.
7
Press PROG/CLOCK SET.
» The minute digits begin to blink.
8
Press / or VOL -/+ to set the minute.
9
Press PROG/CLOCK SET WR FRQÀUP
Note
‡
To exit clock setting mode without storing, press
‡
If no button is pressed in 90 seconds, the system exits
clock setting mode automatically.
‡
If clock is not manually set, when iPod/iPhone is
connected, the unit synchronizes time from the iPod/
iPhone automatically.

Demonstrate features

In the standby mode, press .
» [WELCOME TO PHILIPS] (welcome
to Philips) scrolls on the display.
» [DEMO ON] (demo on) scrolls on
the display.
» The feature names are displayed one
by one.
‡ To exit the feature demonstration,
press again.
» [DEMO OFF] (demo off) scrolls on
the display.

Turn on

Press .
» The unit switches to the last selected
source.
12 EN
Switch to standby
When the unit is turned on, press
the unit to standby.
‡ In standby, press and hold
three seconds to switch from normal
standby to Eco power standby or vice
versa.
» In normal standby, the clock (if set)
appears on the display panel.
» In Eco power standby, the backlight on
the display panel turns off.
.
to switch
over