Maintenance; Troubleshooting - Philips DCM1075 User Manual

‡ 8QVXSSRUWHG ÀOH IRUPDWV DUH VNLSSHG
For example, Word documents (.doc)
RU 03 ÀOHV ZLWK H[WHQVLRQ GOI DUH
ignored and not played.
‡ $$& :$9 3&0 DXGLR ÀOHV
‡ '50 SURWHFWHG :0$ ÀOHV ZDY
PD PS PS DDF
‡ :0$ ÀOHV LQ /RVVOHVV IRUPDW

Maintenance

Clean the cabinet
‡ Use a soft cloth slightly moistened with
a mild detergent solution. Do not use a
solution containing alcohol, spirits, ammonia
or abrasives.
Clean discs
‡ When a disc becomes dirty, clean it with
a cleaning cloth. Wipe the disc from the
centre out.
‡ Do not use solvents such as benzene,
thinner, commercially available cleaners,
or antistatic spray intended for analogue
records.
Clean the disc lens
‡ After prolonged use, dirt or dust may
accumulate at the disc lens. To ensure good
SOD\ TXDOLW\ FOHDQ WKH GLVF OHQV ZLWK 3KLOLSV
CD lens cleaner or any commercially
available cleaner. Follow the instructions
supplied with cleaner.

9 Troubleshooting

Warning
‡
Never remove the casing of this apparatus.
To keep the warranty valid, never try to repair
the system yourself.
If you encounter problems when using this
apparatus, check the following points before
UHTXHVWLQJ VHUYLFH ,I WKH SUREOHP UHPDLQV
unsolved, go to the Philips web site (www.
philips.com/welcome). When you contact
Philips, ensure that the apparatus is nearby
and the model number and serial number are
available.
No power
‡ Ensure that the AC power plug of the unit
is connected properly.
‡ Ensure that there is power at the AC
outlet.
‡ To save power, the unit switches to
standby automatically 15 minutes after
a play reaches the end and no control is
operated.
No sound
‡ Adjust the volume.
No response from the unit
‡ Disconnect and reconnect the AC power
plug, then turn on the unit again.
Remote control does not work
‡ %HIRUH SUHVVLQJ DQ\ IXQFWLRQ EXWWRQ ÀUVW
select the correct source with the remote
control instead of the main unit.
‡ Reduce the distance between the remote
control and the unit.
‡ Insert the battery with its polarities (+/–
signs) aligned as indicated.
‡ Replace the batteries.
‡ Aim the remote control directly at the
sensor on the front of the unit.
EN 19