Set The Sleep Timer; Play From An External Device; Headphone - Philips DCM1075 User Manual

Activate/deactivate alarm timer
In standby mode, press SLEEP/TIMER
repeatedly to activate or deactivate timer.
» If timer is activated,
Note
‡
Alarm timer is not available in MP3 LINK mode.
‡
If DISC/USB/iPod/iPhone source is selected, yet no disc
is placed or no USB/iPod/iPhone connected, the system
switches to the tuner source automatically.
‡
If iPod/iPhone playlist is selected as the alarm source,
you need create a playlist called "PHILIPS" in your iPod/
iPhone.
‡
If no playlist called "PHILIPS" is created in the iPod/
iPhone or no track is stored in the playlist, the unit
switches to TUNER alarm source.

Set the sleep timer

This unit can switch to standby automatically
after a set period of time.
When the unit is turned on, press SLEEP/
TIMER repeatedly to select a set period of time
(in minutes):
‡ [120 SLEEP]
‡ [90 SLEEP]
‡ [60 SLEEP]
‡ [45 SLEEP]
‡ [30 SLEEP]
‡ [15 SLEEP]
» When sleep timer is activated,
displayed.
To deactivate sleep timer
Press SLEEP/TIMER repeatedly until [OFF
SLEEP] (off sleep) is displayed.
» When sleep timer is deactivated,
disappears.
is displayed.
is

Play from an external device

You can also listen to an external audio device
through this unit.
1
Press MP3 LINK to select the MP3 link
source.
2
Connect an MP3 link cable to:
‡ the MP3 LINK connector (3.5mm) on
the unit.
‡ the headphone connector on an
external device.
3
Start to play the device (see user manual
of the device).

Headphone

Plug headphones (not supplied) into the
connector on the unit to listen through the
headphones.
EN 17