Table of Contents
Advertisement
Auto install radio stations
When you connect power and no radio
stations are stored, the unit automatically begins
to store radio stations.
1
Connect the unit to the power supply.
» [AUTO INSTALL - PRESS PLAY-
STOP CANCEL] (press
automatic installation, or press
cancel) is displayed.
2
Press
on the main unit to start
installation.
» The unit automatically stores radio
VWDWLRQV ZLWK VXIÀFLHQW VLJQDO VWUHQJWK
» When all the available radio stations
DUH VWRUHG WKH ÀUVW SUHVHW UDGLR VWDWLRQ
is broadcast automatically.
Set clock
Note
‡
You can set the clock in standby mode only.
1
Press
to switch the unit to standby.
2
Make sure that --:-- (or clock) is displayed.
3
Press and hold PROG/CLOCK SET to
activate the clock setting mode.
» [CLOCK SET] (clock set) is displayed.
» The 12 hour or 24 hour format is
displayed.
12
EN
4
Press
or 24 hour format.
5
Press PROG/CLOCK SET.
» The hour digits begin to blink.
6
Press
7
Press PROG/CLOCK SET.
» The minute digits begin to blink.
8
Press
9
Press PROG/CLOCK SET WR FRQÀUP
‡
To exit clock setting mode without storing, press
‡
If no button is pressed in 90 seconds, the system exits
clock setting mode automatically.
‡
If clock is not manually set, when iPod/iPhone is
connected, the unit synchronizes time from the iPod/
iPhone automatically.
to start
to
Demonstrate features
In the standby mode, press .
» [WELCOME TO PHILIPS] (welcome
» [DEMO ON] (demo on) scrolls on
» The feature names are displayed one
‡
» [DEMO OFF] (demo off) scrolls on
/
or VOL -/+ to select 12 hour
/
or VOL -/+ to set the hour.
/
or VOL -/+ to set the minute.
Note
to Philips) scrolls on the display.
the display.
by one.
To exit the feature demonstration,
press
again.
the display.
.
Advertisement
Table of Contents
