Behringer ULM300MIC Quick Start Manual page 6

10 ULM300MIC
ULM300M/ULM300RS Controls
(4) (5)
(7)
(8)
(1)
(2)
(3)
(6)
(9) (10)
Controls
(EN) (1)
POWER/STATUS LED will light
green when the microphone is
powered on. The LED will fl ash
when Mute mode is engaged,
and will turn off when the mic is
powered down. The LED will fl ash
red when the batteries are low
and need to be replaced.
(2)
VOLUME UP/DOWN buttons
perform several functions:
• • Volume - Press the buttons briefl y to
turn the volume up or down.
• • Mute – Hold the DOWN button to
mute the microphone, press the UP
button to unmute.
• • Power – Hold the UP button to turn
the microphone on. While in Mute
mode, hold the DOWN button again
to power the mic off .
Note – if the microphone is left in Mute
mode for 10 minutes, the power will
automatically turn off .
(3) Changing the batteries – With
the microphone powered off ,
unscrew the lower half of the
microphone body to expose the
battery slots. Observing correct
polarity, insert the new batteries
and replace the covering, then
turn the power on again
Quick Start Guide 11
(4)
POWER LED lights when the unit
is powered on.
(5)
AUDIO LED lights whenever an
audio signal is received from
the microphone.
(6)
Connection Meter displays
the signal strength of the
wireless connection.
(7)
BATT(ery) LED lights green to
indicate a healthy battery, and
lights red when the batteries
need to be replaced. It will
also light red when the mic is
turned off .
(8) OUTPUTS send the audio signal
via balanced XLR or unbalanced
¼" TS cable.
(9) DC IN socket accepts the
connection of the included
power adapter.
(10) ON/OFF switch powers the unit
on and off .