Table of Contents
Advertisement
Super A2SDi-TP8F/LN4F, A2SDi-16C-TP8F User's Manual
Power Button
The Power Button connection is located on pins1 and 2 of JF1. Momentarily contacting both
pins will power on/off the system. This button can also be configured to function as a suspend
button (with a setting in the BIOS - see Chapter 4). To turn off the power in the suspend
mode, press the button for at least 4 seconds. Refer to the table below for pin definitions.
Reset Button
The Reset Button connection is located on pins 3 and 4 of JF1. Attach it to a hardware reset
switch on the computer case to reset the system. Refer to the table below for pin definitions.
1
PWR
Power Button
2
Reset
Reset Button
Power Button
Pin Definitions (JF1)
Pins
Definition
1
Signal
2
Ground
Reset Button
Pin Definitions (JF1)
Pins
Definition
3
Reset
4
Ground
1
2
Ground
Ground
3.3 V
Power Fail LED
OH/Fan Fail LED
UID LED
3.3V Stby
NIC2 Active LED
3.3V Stby
NIC1 Active LED
3.3V Stby
HDD LED
3.3V
PWR LED
15
16
34
1. PWR Button
2. Reset Button
Advertisement
Table of Contents
