Supermicro A2SDi-TP8F User Manual page 108

Super A2SDi-TP8F/LN4F, A2SDi-16C-TP8F User's Manual
5. After the BIOS recovery process is completed, press the <Enter> key to reboot the
system.
6. Using a different system, extract the BIOS package into a USB flash drive.
7. Press <Del> continuously during system boot to enter the BIOS setup utility. From the
top of the tool bar, click on Boot and press <Enter> to enter the submenu. From the
submenu list, select Boot Option #1 as shown below. Then, boot Option #1 to [UEFI
AP:UEFI: Built-in EFI Shell]. Press <F4> to save the settings and exit the BIOS setup
utility.
108