Supermicro A2SDi-TP8F User Manual page 3

Table of Contents

Advertisement

About This Manual
This manual is written for system integrators, IT technicians and knowledgeable end users. It
provides information for the installation and use of the A2SDi-TP8F/LN4F, A2SDi-16C-TP8F
motherboard.
About This Motherboard
The Supermicro A2SDi-TP8F/LN4F, A2SDi-16C-TP8F motherboard comes with an integrated
Intel® Atom SoC (system-on-a-chip) that has up to 16 Cores and is optimized for low-power
consumption. The integrated memory controller supports up to 64GB DDR4 ECC/Non-ECC
Unbuffered SO-DIMM with a max data rate of 2400MHz. This motherboard also provides
support for USB 3.0, 16 lanes of PCI Express 3.0 connectivity and 10GbE Ethernet. The
A2SDi-TP8F/LN4F motherboard is an excellent choice for microservers. Please note that
this motherboard is intended to be installed and serviced by professional technicians only.
For processor/memory updates, please refer to our website at http://www.supermicro.com/
products/.
Conventions Used in the Manual
Special attention should be given to the following symbols for proper installation and to prevent
damage done to the components or injury to yourself:
Warning! Indicates important information given to prevent equipment/property damage
or personal injury.
Warning! Indicates high voltage may be encountered when performing a procedure.
Important: Important information given to ensure proper system installation or to
relay safety precautions.
Note: Additional Information given to differentiate various models or provides infor-
mation for correct system setup.
Preface
3
Preface

Advertisement

Table of Contents
loading

This manual is also suitable for:

A2sdi-ln4fA2sdi-16c-tp8f

Table of Contents