Supermicro Supero SUPERSERVER 2027PR-DNCR User Manual page 122

SUPERSERVER 2027PR-DNCR/DNCFR/DNCTR USER'S MANUAL
Device Settings
This item displays the settings of Serial Port 1 (COM).
Change Settings
This option specifi es the base I/O port address and the Interrupt Request
address of Serial Port 1 (COM). Select Disabled to prevent the serial port from
accessing any system resources. When this option is set to Disabled, the serial
port becomes unavailable. The options are Auto, IO=3F8h; IRQ=4; IO=3F8h;
IRQ=3; IO=2F8h; IRQ=3; IO=3E8h; IRQ=5; IO=2E8h; IRQ=7; IO=3F8h; IRQ=3,
4, 5, 6, 7, 10, 11, 12; IO=2F8h; IRQ=3, 4, 5, 6, 7, 10, 11, 12; IO=3E8h; IRQ=3,
4, 5, 6, 7, 10, 11, 12; and IO=2E8h; IRQ=3, 4, 5, 6, 7, 10, 11, 12;
Device Mode
Use this feature to select the desired mode for a serial port specifi ed. The options
are Normal and High Speed.
SOL (Serial_Over_LAN) Confi guration
SOL Serial Port
Select Enabled to enable a serial port specifi ed by the user. The options are
Enabled and Disabled.
Device Settings
This item displays the settings of Serial Port 2 (SOL).
Change Settings
This option specifi es the base I/O port address and the Interrupt Request
address of Serial Port 2 (SOL). Select Disabled to prevent the serial port from
accessing any system resources. When this option is set to Disabled, the serial
port becomes unavailable. The options are Auto, IO=3F8h; IRQ=4; IO=3F8h;
IRQ=3; IO=2F8h; IRQ=3; IO=3E8h; IRQ=5; IO=2E8h; IRQ=7; IO=3F8h; IRQ=3,
4, 5, 6, 7, 10, 11, 12; IO=2F8h; IRQ=3, 4, 5, 6, 7, 10, 11, 12; IO=3E8h; IRQ=3,
4, 5, 6, 7, 10, 11, 12; and IO=2E8h; IRQ=3, 4, 5, 6, 7, 10, 11, 12;
SOL Device Mode
Use this feature to select the desired mode for a serial port specifi ed. The options
are Normal and High Speed.
7-20