Table of Contents
Advertisement
SYMPTOM
Frequency Interference
SOLUTION
1.
Turn the power off to your ceiling fan.
2.
Please use a small size tool to change the frequency settings on the control system.
3.
Return power to the unit.
Note: After the AC power is on, do not press any other button on the transmitter before pressing the "Stop" button, doing so will cause the
procedure to fail.
4.
Within 60 seconds of turning the Fan's AC power ON. Press the transmitter's "Stop" button and hold the "Stop¡" button for 10 seconds.
5.
Once the receiver has detected the set frequency, the down light of your fan if applicable will blink twice. (there is no indication if your fan is not
equipped with a light).
6.
The receiver has now learn the frequency which has been selected on the transmitter. After completing the steps above, you should be able to
operate the ceiling fan and light. If the fan is not responding to the transmitter, please turn the power off to the receiver, and repeat the process.
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the MinkaAire Java and is the answer not in the manual?