Table of Contents
Advertisement
page | 6
INSTALLATION AND SETUP
Overview
Proper installation of the Episode® ELE Sub powered subwoofer requires these basic steps:
1. Place the subwoofer in the room. (Page 4)
2. Make connections to the system. (Pages 5 & 6)
3. Fine tune the subwoofer for the best sound quality and operation. (Page 7)
Review the options for each step and use the best method for the application. After installation is complete, test the
system thoroughly to ensure reliability and sustained sound quality. If the subwoofer will not function or perform
as expected, make sure that installation was completed correctly and check the Troubleshooting Steps before
contacting Episode® for assistance.
Placing the Subwoofer
Subwoofer placement can have an effect on the performance that you receive. All rooms are different, but the
strongest output will likely occur if the subwoofer is placed in a corner of the room on the same wall as the
front channel speakers. This is known as the boundary effect and will emphasize certain bass frequencies while
canceling others. Some listeners will find this to be the best sounding result, while others may find it "boomy" or
muddy. Experiment with the placement options available to you and use the tuning instructions that follow in the
"Installation" section of this manual.
Left
Center
Left
Side
Left
Rear
Right
Right
Side
Right
Rear
www.snapav.com Support 866.838.5052
www.snapav.com Support 866.838.5052
Advertisement
Table of Contents
