Page 1
OWNER’S MANUAL MEGA Powered Subwoofers S Series - Single Driver Series ES-SUB-MEGA-S8 ES-SUB-MEGA-S10 ES-SUB-MEGA-S12 ES-SUB-MEGA-S15 D Series - Dual Driver Series ES-SUB-MEGA-D8 ES-SUB-MEGA-D10 ES-SUB-MEGA-D12...
page | 2 REGULATORY COMPLIANCE & SAFETY INFORMATION 1. Read these instructions. Lisez ces instructions. 2. Keep these instructions. Conservez ces instructions 3. Heed all warnings. Respectez tous les avertissements. 4. Follow all instructions. Suivez toutes les instructions. 5. Do not use this apparatus near water. Ne pas utiliser cet appareil près de l’eau.
Page 3
page | 3 from the AC mains, remove the power cord from the socket-outlet or turn off the circuit breaker that supplies the AC mains power to the socket-outlet. La prise de courant qui alimente l’équipement doit être facilement accessible. Pour déconnecter complètement l’alimentation de l’unité...
Page 4
page | 4 USA & Canada Compliance FCC Part 15, Subpart B & IC Unintentional Emissions Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules.
Page 5
page | 5 Notice: The term “FCC ID:” and “IC:” before the certification number signifies that FCC and Industry Canada technical specifications were met. CONTAINS FCC ID: A8TBM70ABCDEFGH CONTAINS IC: 12246A-BM70BLES1F2 CONTAINS FCC ID: NKR-SWA12 CONTAINS IC: 4441A-SWA12 This equipment must be installed by qualified professionals or contractors in accordance with FCC Part 15.203 & IC RSS- 247, Antenna Requirements.
Page 6
page | 6 Recycling Wirepath Home Systems, LLC understands that a commitment to the environment is essential for a health life and sustainable growth for future generations. We are committed to supporting the environmental standards, laws, and directives that have been put in place by various communities and countries that deal with concerns for the environment.
LINE-LEVEL/UNBALANCED INPUTS ............................UNBALANCED HI LEVEL INPUTS ................................BALANCED INPUTS ................................... 12V DC TRIGGER ................................... IP CONTROL ................EPISODE MEGA SUBWOOFER CONTROL AND SETUP APPLICATION ..................................FINE TUNING ........................INSTALLING AND REMOVING THE GRILLES ..................................CARPET SPIKES ..................................... CLEANING ...................................
Remote Operation Both the MEGA S Series and MEGA D Series offer an Ethernet connection for IP control with many home automation platforms. Currently supported drivers and IP control documentation can be found on the associated MEGA subwoofer product page.
Driver): For optimal performance, we recommend that the subwoofer be placed at a 45° angle and at least 30cm (12“) from the corner. Left Right Rear Rear For ultimate flexibility in placement, use the optional Episode MEGA Subwoofer Wireless Transmitter (ES-SUB-WIFI-TX-MEGA). www.snapav.com Support 866.838.5052...
| 10 BACK PANEL SUBWOOFER HOOK - UP AND CONTROLS Your Episode subwoofer is suited to match nearly every home theater or music application. ES-SUB-MEGA-S8/S10 ES-SUB-MEGA-S12/S15 v w y z { 1. HI LEVEL INPUTS: Gold-plated, five-way, binding post inputs for speaker-level connections.
Page 11
Release the button subwoofer now in wireless pairing mode. The LED will continue to blink slowly for 1 min, and goes OFF if pairing is not successful. Wireless pairing requires the Episode Subwoofer Wireless Transmitter (ES-SUB-WIFI-TX-MEGA), sold separately. See the ES-SUB-WIFI-TX-MEGA installation manual for complete pairing set-up guide.
Page 12
page | 12 5. VOLUME: Controls overall output for the subwoofer. 6. 12V TRIGGER: For remote on/off functionality without the need of IP connectivity. 7. SERVICE: USB port for future firmware updates. 8. ETHERNET: Allows for IP control. Currently supported drivers and IP control protocol documentation can be found on the associated MEGA subwoofer product page.
| 13 GETTING CONNECTED Episode MEGA powered subwoofers are among the most flexible on the market today and can be configured for use in many different applications, as shown in the figures below. • For line level connections, use high-quality RCA cables that feature low-impedance shielding and high-quality connectors.
page | 14 UNBALANCED HI LEVEL INPUTS ES-SUB-MEGA-S12/S15 ES-SUB-MEGA-S8/S10 AV RECEIVER/PROCESSOR AV RECEIVER/PROCESSOR Left Right Left Right Sub Balanced Out Sub Balanced Out Switched Switched +12V Trigger +12V Trigger Outlet Outlet ES-SUB-MEGA-D8 ES-SUB-MEGA-D10/D12 AV RECEIVER/PROCESSOR AV RECEIVER/PROCESSOR Left Right Left Right Sub Balanced Out Sub Balanced Out...
page | 15 BALANCED INPUTS Using Left and Right balanced XLR connections: ES-SUB-MEGA-D8 ES-SUB-MEGA-D10/D12 AV RECEIVER/PROCESSOR AV RECEIVER/PROCESSOR Left Right Left Right Switched Switched +12V Trigger +12V Trigger Outlet Outlet Sub Balanced Out Sub Balanced Out Using an LFE balanced connection: ES-SUB-MEGA-D8 ES-SUB-MEGA-D10/D12 AV RECEIVER/PROCESSOR...
page | 16 12V DC TRIGGER The D Series MEGA subwoofers are equipped with a 12V trigger input to turn the amplifier on/off, reducing power consumption when not in use. When this input receives a 12V signal, the amplifier turns on; when the signal goes away, the amplifier turns off.
Page 17
page | 17 DEFAULT LOGIN All models follow the same log-in process for accessing the Local interface network settings: Default User Name: admin Default Password: The Service Tag number, found on the back of the subwoofer. NOTE: The above log-in is reinstated if product is reset to default settings. LOCAL INTERFACE ADJUSTMENTS The Local interface will show basic product information, such as product name, model, MAC address, firmware version, and Service Tag number.
| 18 EPISODE MEGA SUBWOOFER CONTROL AND SETUP APPLICATION Your Episode MEGA Subwoofer app allows you to fine-tune the output using your Android or iOS device. Download the app from the App Store or Google Play Store. Knobs and switches have been replaced by a digital signal processor (DSP), which enables you to make precise adjustments to your subwoofer.
Page 19
Two options available - Auto Off/On via signal or Ethernet. Low Pass Sets the frequency at which the Episode MEGA subwoofer starts to perform. You can adjust the cutoff frequency by adjusting the slider. You want to match your stereo/surround speakers so the subwoofer can blend in seamlessly.
You can turn Auto EQ off or on at any time from the SETUP menu. FINE TUNING After making all the connections and calibrating the sub via the Episode MEGA Subwoofer app, you can still perform some fine tuning using the following guidelines: NOTE: When using an AV receiver with an automatic calibration system, perform the Episode MEGA subwoofer auto calibration via the app first, and then run the AV receiver’s full-room calibration.
page | 21 your subwoofer’s placement, the bass may sound louder or deeper when the phase and delay have been optimized. In some cases, adjusting PHASE and DELAY will make no discernible difference. INSTALLING AND REMOVING THE GRILLES To remove the grilles, gently pull at the corners of the grille frame to separate the grille from the baffle of the subwoofer.
TROUBLESHOOTING Episode® speakers are designed to function trouble-free. Most problems that occur are due to simple issues. If you have trouble, please check the list of simple fixes below. If the problem persists, contact Episode® Technical Support at 1.866.838.5052 No Sound •...