Supplied Components; Preparing The Remote Control Unit - Sharp PN-65HC1-LCD Setup Manual

If any component should be missing, please contact your dealer.
 Liquid Crystal Display Monitor: 1
 Remote control unit: 1
 Cable clamp (affixing type): 3
 Power cord
 Remote control unit battery: 2
 CD-ROM (Utility Disk for Windows): 1
 Setup Manual (this manual): 1
* SHARP Corporation holds authorship rights to the Utility Disk program. Do not reproduce it without permission.
* For environmental protection!
Do not dispose of batteries in household waste. Follow the disposal instructions for your area.

Preparing the Remote Control Unit

1. Place your finger on the part marked with the ▲, and
then pull the cover off.
2. See the instructions in the compartment and put in the
batteries (R03 or LR03 ("AAA" size) x 2) with their plus
(+) and minus (-) sides oriented correctly.
3. Close the cover.

Supplied Components

 Touch pen: 2
 Tray: 1
 Tray mounting screws (M3x15): 5
 USB cable: 1
 Cover SHARP logo: 1
Place this sticker onto the SHARP logo to cover the logo.
 Wireless Adapter: 1
5
E