Table of Contents
Advertisement
VIVOTEK
Applications > DI and DO
Digital input: Select High or Low as the Normal status for the digital input connection. Connect
the digital input pin of the Network Camera to an external device to detect the current connection
status.
Digital output: Select High or Low to define normal status for the digital output. Connect an output
line to an external device, the Network Camera will report the current signal status. You may then
configure the Normal status (non-trigger status) as High or Low.
Set up the event source as DI on Event > Event settings > Trigger. Please refer to page 110 for
detailed information.
126 - User's Manual
Advertisement
Table of Contents
