Table of Contents
Advertisement
Dishwashing
Do you want to add more dishes?
Open the door. The dishwasher stops automatically. Add
the dishes, close the door and the dishwasher continues
the programme.
If the dishwasher is turned off using the
main power switch or due to a power
failure
If the dishwashing programme was not finished, the
interrupted programme continues when power is restored.
NOTE!
During drying, the programme is interrupted if the power
is cut or the door is open for more than 2 minutes.
8
After dishwashing
Once the programme has finished, "End" appears
on the display.
A buzzer also sounds at the end of the programme. See
the section Settings, which describes how to change this
function.
A status light also indicates the end of the programme.
See the section Status light.
Once the dishwasher has finished, it uses only standby
power. Turn off the dishwasher using the main power
switch if you want to completely cut the power. Turn off
the water supply valve after each use.
19
Advertisement
Table of Contents
