Specifications; Storage And Service - Tripp Lite AG-01A2 Series Owner's Manual

4. Specifications

Battery
DC System Voltage
Battery Type
Battery Quantity
Battery Pack Ah
UPS Connection
Physical
Unit Dimensions (H x W x D)
Unit Weight
Material of Construction
External Battery Pack Form Factor
Environment
Storage Temperature
Operating Temperature
Operating Elevation
Humidity
5. UPS and Battery Recycling
Batteries can present a risk of electrical shock and burn from high short-circuit current. Observe proper precautions. Do not dispose of the
batteries in a fire. Do not open the batteries. Do not short or bridge the battery terminals with any object. Unplug and turn off the UPS before
performing battery replacement. Use tools with insulated handles. Battery replacement should be performed only by authorized service
personnel using the same number and type of batteries (Sealed Lead-Acid). The batteries are recyclable. Refer to your local codes for
disposal requirements or visit http://www.tripplite.com/support/recycling-program for recycling information.

6. Storage and Service

Storage
If the charging source remains off for an extended period of time, it should be turned on periodically to allow the batteries to recharge. The
charging source should be turned on and the batteries should be recharged for at least one uninterrupted 24-hour period every 3 months.
Failure to recharge the batteries periodically may cause permanent battery damage.
Service
Your Tripp Lite product is covered by the warranty described in this manual. A variety of Extended Warranty and On-Site Service Programs
are also available from Tripp Lite. For more information on service, visit www.tripplite.com/support. Before returning your product for service,
follow these steps:
1. Review the installation and operation procedures in this manual to insure that the service problem does not originate from a misreading
of the instructions.
2. If the problem continues, do not contact or return the product to the dealer. Instead, visit www.tripplite.com/support.
3. If the problem requires service, visit www.tripplite.com/support and click the Product Returns link. From here you can request a Returned
Material Authorization (RMA) number, which is required for service. This simple on-line form will ask for your unit's model and serial
numbers, along with other general purchaser information. The RMA number, along with shipping instructions will be emailed to you. Any
damages (direct, indirect, special or consequential) to the product incurred during shipment to Tripp Lite or an authorized Tripp Lite service
center are not covered under warranty. Products shipped to Tripp Lite or an authorized Tripp Lite service center must have transportation
charges prepaid. Mark the RMA number on the outside of the package. If the product is within its warranty period, enclose a copy of your
sales receipt. Return the product for service using an insured carrier to the address given to you when you request the RMA.
+/- 144V DC
12V 9Ah
96
36
Hardwire (3-Pole Terminal Block)
23.5 x 30.08 x 33.58 in. / 1999 x 1016 x 749 mm
771.62 lb. / 350 kg
Steel
Tower
-4°F to 104°F / -20°C to 40°C
32°F to 104°F / 0°C to 40°C
0 to 10,000 ft. / 0 to 3,000 m
5% to 95% RH (Non-Condensing)
9