Advertisement
Installation and Operation
BLU-RAY
1080p (24 Hz)
or
1080i (60Hz)
1
Connect the HDMI source to the HDMI input on the local
transmitter unit.
2
Connect the TMDS 110 punchdown connector on the local transmitter
to the TMDS 110 punchdown connector on the remote receiver using
Cat5e/6 cable.
Note: See the installation diagrams for maximum extension distance. The
included 110 punchdown tool is provided for your convenience. For best results,
use a professional punchdown tool, such as the Tripp Lite N046-000.
3
Connect the DDC 110 punchdown connector on the local transmitter
to the DDC 110 punchdown connector on the remote receiver using
Cat5e/6 cable.
Note: See the installation diagrams for maximum extension distance.The included
110 punchdown tool is provided for your convenience. For best results, use a
professional punchdown tool, such as the Tripp Lite N046-000.
4
Connect the HDMI output on the remote receiver to the HDMI monitor.
5
Turn on the power to the HDMI source.
17-12-286-93-2787.indd 3
TMDS
UP TO 150 ft. (Cat6)
UP TO 100 ft. (Cat5)
DDC
LOCAL
TRANSMITTER
P167-000 Installation Diagram
3
REMOTE
RECEIVER
DISPLAY
1/26/2018 1:31:08 PM
Advertisement
