Acer TravelMate 8200 Service Manual page 64
Hide thumbs
Also See for TravelMate 8200:
- User manual (107 pages) ,
- Manuel d'utilisation (100 pages) ,
- Manual do utilizador (98 pages)
Table of Contents
Advertisement
will be enabled simultaneously.
Network Boot:
It permits the users to boot from network.
F12 Boot Menu:
Enabled: When it is enabled, the users can modify device boot priority by pressing <F12>
•
during POST.
Disabled: When it is not enabled, device boot priority will not be adjustable during POST.
•
The boot device change is only for one-time change. In other words, when the system is
rebooted, the boot device sequence will be the same as the one defined in the BIOS setup
(Boot option).
D2D Recovery:
It allows the users to enable or disable the disk-to-disk recovery.
Processor Power Management:
To save power in working state, the OS leads the CPU to low-power states (C1, C2 and C3)
when the OS is idle. In the low-power state, the CPU does not run any instructions, and wakes
up when an interruption, such as the OS scheduler's timer interruption, occurs.
54
Chapter 2
Advertisement
Table of Contents
