Acer TravelMate 8200 Service Manual page 56

System Board Major Chips
Item
PCMCIA & IEEE 1394
& Card Reader
Audio
Video
Keyboard
LAN
Replicator Port
Item
Feature
Battery
Item
Vendor & model name
Battery Type
Pack capacity
Number of battery cell
Battery life
System Power Management
Legacy Mode
Off
On
46
O2 711MP1
Realtek ALC883
ATI M56P
PC97551
Intel ® Tekoa GigaLAN 82573E
• 120 pins for signals and four pins for power
• Power supplied from Acer ezDock
• Max. six USB ports support
• Two 1394 ports support
• One new card socket and one PCMCIA card socket
• GigaLAN and modem support
• analog VGA, TV out and DVI-D support
• One parallel, one serial port and two PS2 port for legacy devices
support
Panasonic pack 7800MAH / Sanyo pack 2600MAH
Li-Ion
87 W
nine cell
six cell (optional: 42 W 3800MAH Li-Ion 2nd battery pack)
• 80% charge in one hour
• two hour rapid charge system-off
• 2.5 hour charge-in-use
• Mech. Off (G3): All devices in the system are turned off completely.
• Soft Off: (G2/S5): All devices in the system are turned off completely
by OS shutdown.
• Working (G0/S0): Individual devices such as the CPU and hard disk
may be power-managed in this state.
• S3 Sleeping State: CPU set power down, VGA suspend, PCMCIA
suspend, Audio power down, HDD power down, CD-ROM power
down, Super I/O low power mode.
• S4 Sleeping State: It is also called hibernation state. The system
saves all system setting and data onto disk before the whole system
is powered off.
Controller
Description
Specification
ACPI Mode
Chapter 1