Subscribe to Our Youtube Channel
Related Manuals for DAPAudio HS-510P
Summary of Contents for DAPAudio HS-510P
- Page 1 MANUAL ENGLISH HS-510P Ordercode: D6568 Highlite International B.V. – Vestastraat 2 – 6468 EX – Kerkrade – the Netherlands...
- Page 2 HS-510P Table of contents Warning ....................................2 Safety Instructions ................................. 2 Operating Determinations ............................3 Return Procedure ................................4 Claims ....................................4 Description of the device ..............................5 Overview ..................................5 Installation ................................... 5 Set Up and Operation ............................... 5 Troubleshooting .................................
- Page 3 Save the carton and all packing materials. In the event that a fixture must be returned to the factory, it is important that the fixture be returned in the original factory box and packing. Your shipment includes: DAP Audio HS-510P • User manual •...
- Page 4 HS-510P Make sure you do not use the wrong kind of cables or defective cables. • Extreme frequency boosts in connection with a high input signal level may lead to overdriving your • equipment. Should this occur, it is necessary to reduce the input signal level.
- Page 5 HS-510P Return Procedure Returned merchandise must be sent prepaid and in the original packing, call tags will not be issued. Package must be clearly labeled with a Return Authorization Number (RMA number). Products returned without an RMA number will be refused. Highlite will not accept the returned goods or any responsibility.
- Page 6 Overview Fig. 01 Installation Remove all packing materials from the HS-510P. Check if all foam and plastic padding is removed. Connect all cables. Do not supply power before the whole system is set up and connected properly. Always disconnect from electric mains power supply before cleaning or servicing.
- Page 7 HS-510P Troubleshooting No Sound Always check if all the cables and cords are connected. Always turn off power to the area before checking the wires, to prevent electric shock. If everything works properly and there is still no sound, revisit the manufacturer’s instructions to make sure they were followed during installation.
- Page 8 ©2015 DAP Audio...
Need help?
Do you have a question about the HS-510P and is the answer not in the manual?
Questions and answers