Getting Started - Hitachi VZC40FHD5300 Owner's Manual

Getting Started

Getting Started
Once you have connected your TV antenna and other AV playback equipment (ie. CD
player, amplifier, Blu-ray player) to the appropriate input sockets on the back of the TV,
you will need to be comfortable with selecting several basic operations before setting
up your TV using the Menu system.
Powering the TV
To turn the power ON or OFF:
• Plug the power cord into a suitable power point and turn on power at the outlet.
• Press the POWER button on the TV (or on the remote control, making sure to aim
it at the sensor at the front of the TV); the indicator will glow blue. Press it again to
power off (standby mode); the indicator will glow red.
NOTE:
• Switching off and on again: After you have switched off the TV, do not immediately
try to power it on again. If you want it back on, wait for at least 30 seconds, until the
indicator light has gone out, before switching on the TV again.
• Standby mode: If you are not going to use your TV for a long period of time, switch
it off and then unplug it from the power supply. Do not leave it in standby mode for a
long period of time.
First Time Use
When you switch on the TV for the first time, the First Time Setup menu will be
displayed on the screen, as illustrated below.
• Use the / /
• Use the / /
• Use the / /
NOTE: Auto scanning for channels will take some time; please be patient. When auto
scanning is complete, the TV will show the first channel found.
After Sales Support
Telephone:
Email:
/ buttons to select your OSD language.
/ buttons to select the country you are living in.
/ buttons to select the type of scan (DTV+ATV, DTV, ATV).
1300 886 649
info@tempo.org
21