Hitachi VZC40FHD5300 Owner's Manual page 13

Installation (Cont.)
Assembling the Base Stands
If you want to use the TV standing on appropriate furniture, first find a suitable location
where you can attach the TV base stands to the body of the TV. You will need to
arrange a soft cloth that is large enough to cover the entire front panel of the TV (for
protection of the LCD screen), as well as a screwdriver to attach the base stands.
Before using the TV, install the stands as described below, or if you want to mount it
to a wall, see the next page for mounting advice; the wall mount (bracket) itself is not
supplied.
Make sure the TV is unplugged from the power supply before installing or removing
Step 1
Place a soft cushioned material
on top of a flat surface to prevent
damaging the screen panel. Then
place the TV monitor flat on top,
with the screen side facing down, as
illustrated (2).
Step 2
Align the screw holes on the stands
and the bottom of the TV, as
illustrated with arrows (2).
Step 3
Tighten the screws (supplied) with a
screwdriver to affix the stands to the
panel.
CAUTION! Do not apply excessive force
as this may damage the screw holes.
After Sales Support
Telephone:
Email:
IMPORTANT!
the base stands.
1300 886 649
info@tempo.org
1
2
3
13