Connecting To A Video Conference System Using Audio Cables - Yamaha YVC-1000MS User Manual

Connecting to a video conference system using audio cables

■
Before connecting, check the following.
Prepare two audio cables (stereo RCA pin plug) for input and output.
The video conference system may provide different shapes of audio input and output terminals depending on the model. Use
audio cables with the plug shapes that match the shapes of the audio input and output terminals for your video conference
system. The product must be connected to a stereo RCA pin plug regardless of the type of the plug to be connected to the
video conference system.
■
Connection
Connect the product to the video conference system using audio cables.
Before connecting them, set the product to the standby mode.
Plug into an
outlet
Connect to the
microphone
■
Changing settings for the video conference system
Change the sound input/output settings so that the product is used as a microphone and speaker of the video conference
system.
Note
Be sure to disable the microphone and speaker on the video conference system side.
YVC-1000MS User's Manual
Audio output
terminals
Audio input
terminals
Video conference
system
23