Adjustment Of The Door - Summit SCR 1150 Instruction Manual

13. Fit the accompanying left-side
top hinge. Tighten the tosion spring
approx. 1/2 turn (anticlockwise on
left side, clockwise on rigth.)
16. Retighten the top panel
screws using a screwdriver.
18. After reversing the door, it is important to check that the sealing gasket provides a tight
seal all the way round. If it does not, carefully heat the gasket evenly with a hair dryer. Then
ease the gasket outwards slightly so that it forms a tight seal against the cabinet. Be careful
not to heat the gasket so much that it melts!

ADJUSTMENT OF THE DOOR

(if necessary)
14. Secure the top hinge in
position.
17. Refit the lock housing and
lock pin.
10
15. Raise the appliance into
uppight possion. Click the top
panel into place (it is secured in
three places.)