Mainboard Installation
1. Connect DC-IN (C) cable to mainboard connector (D) (Figure 3-49).
2. Flip mainboard and align mainboard connectors to left side of lower cover
3. Install mainboard at a slight angle into slots on left side (E) of lower cover
NOTE:
NOTE:
Connectors on left side of mainboard (i.e. USB 3.0, HDMI, etc.) are set in lower cover
slots. Do not force mainboard when trying to install it.
4. Install and secure WLAN cables (B) to mainboard with adhesive tape
5. Install and secure two (2) screws (A) to lower cover.
6. Install speaker modules.
7. Install WLAN module.
ID
A
3-46
Size
M2.5x4.0
Quantity
Screw Type
2
Machine Maintenance Procedures
0
(Figure
3-48).
(Figure
3-48).
(Figure
3-47).